CalcUnit Logo

Entropy Calculator

What is the Entropy Calculator?

What this calculator does

This calculator works with thermodynamic entropy, the Clausius kind, in two specific situations. One result divides heat absorbed at a constant temperature by that temperature. The other follows a substance warming or cooling between two temperatures. Statistical and information entropy live elsewhere; this page never counts microstates or probabilities.

The first result: heat at constant temperature

When a system absorbs heat Q reversibly at one fixed absolute temperature T, its entropy changes by ΔS = Q / T. The inputs are Heat Transferred (Q) in joules and Temperature (T) in kelvin. Melting, boiling, and slow heat flow into a large reservoir all fit this shape.

The second result: heating a substance

When mass m with specific heat c warms from T₁ to T₂, temperature climbs as heat arrives, so plain division fails. Integrating the steps gives ΔS = m × c × ln(T₂ / T₁), temperatures in kelvin. The defaults, 2 kilograms of water warming from 293 to 313 kelvin, give 552. 8080 joules per kelvin.

Reading the two results

Both outputs are in joules per kelvin, to four decimal places. The first line, ΔS: Heat at Constant T, answers the Q and T fields. The second line, ΔS: Heating, answers the mass, specific heat, and temperature-pair fields. They are independent calculations sharing one page; neither feeds the other.

Why every temperature must be kelvin

Both formulas divide by temperature or take ratios of temperatures, and those operations only carry physical meaning on an absolute scale whose zero is absolute zero. NIST maintains the kelvin as the SI unit of thermodynamic temperature. Entering Celsius numbers is the single most destructive mistake available on this page.

The kelvin mistake, quantified

Suppose water warms from 20 to 25 degrees Celsius. Typed raw, the ratio is 25 / 20 and the logarithm is 0. 2231. The correct kelvin ratio is 298. 15 / 293. 15, whose logarithm is 0. 0169. The lazy entry overstates the entropy change about thirteenfold, and no other input error on this page comes close to that damage.

Worked example: the page defaults

Heat Transferred of 1,000 joules at 300 kelvin gives 1,000 / 300 = 3. 3333 joules per kelvin on the first line. On the second line, the default substance is 2 kilograms of water, specific heat 4,186, warming from 293 to 313 kelvin, which gives 552. 8080 joules per kelvin.

Worked example: heat delivered at 350 kelvin

Enter 5,000 joules at a constant 350 kelvin and the first result reads 14. 2857 joules per kelvin. Delivered instead at room temperature, 2,000 joules at 298 kelvin reads 6. 7114 joules per kelvin, showing the pattern directly: the colder the system, the more entropy each joule carries in.

Worked example: melting a kilogram of ice

Melting ice absorbs about 334,000 joules per kilogram while sitting exactly at 273. 15 kelvin, a constant-temperature process. Enter that heat and temperature and the result is 1,222. 7714 joules per kelvin, one of the largest everyday entropy changes you will meet, driven by the solid lattice collapsing into liquid disorder.

Worked example: an aluminum block warming

Half a kilogram of aluminum, specific heat about 900 joules per kilogram-kelvin, heated from 300 to 400 kelvin, gains 0. 5 × 900 × ln(400 / 300) = 129. 4569 joules per kelvin. A 5 kilogram iron casting, specific heat 450, warming from 280 to 320 kelvin gains 300. 4456 joules per kelvin.

Negative results mean cooling

Run the heating fields backward, from 313 down to 293 kelvin, and the result is negative 552. 8080 joules per kelvin. That is correct physics, not an error: the substance's own entropy falls as it cools. The second law is safe, because whatever absorbed that heat gained at least as much entropy.

Specific heat values to enter

Water is 4,186 joules per kilogram-kelvin, the page default. Ice is about 2,090, aluminum 900, copper 385, cast iron about 450, and dry air about 1,005. Specific heat drifts somewhat with temperature, and this calculator treats it as constant, which is fair across modest ranges and rough across wide ones.

When a phase change interrupts the heating

If your substance melts or boils partway through the temperature range, the heating formula alone is wrong, because it assumes one phase with one specific heat. Split the problem: heating steps for each phase, and the constant-temperature step with Q set to the latent heat times mass at the transition temperature.

What the logarithm is doing there

Heat a substance in small sips and each sip raises the temperature slightly, so each sip's entropy contribution is the sip divided by a slightly larger temperature. The natural logarithm is the closed form of that stack of sips. It also explains why equal temperature ratios, not equal differences, produce equal entropy steps.

Entropy in the wider picture

Clausius defined this entropy in the nineteenth century from heat and temperature alone, and it governs heat engines, refrigerators, and chemical reactions. Boltzmann later connected it to counting atomic arrangements, S = k × ln W, and Shannon borrowed the mathematics for information. Those two are real entropies; they are not the ones computed here.

Per mole versus per sample

Chemistry texts often quote molar entropy in joules per mole-kelvin. This calculator returns the change for the actual sample you describe, with no mole count anywhere. To compare with molar tables, divide your result by the number of moles in your sample, or scale the table value up by the same count.

Precision and honest limits

Four decimal places suit the arithmetic, but the inputs rarely deserve them: specific heats are known to two or three figures, and the constant-specific-heat assumption costs more accuracy than any rounding. Report two or three significant figures from this page and you are being honest about the model.

A quick sanity check before you trust a result

Warming must give a positive number and cooling a negative one. Doubling the heat at constant temperature must double the first result. Raising both heating temperatures by the same kelvin offset must shrink the second result, because the ratio moves closer to one. Failures point at Celsius entries or swapped temperatures.

Reversible is the fine print

Both formulas describe the reversible path between the two states, the gentlest possible route. Real heat flow across a finite temperature gap is irreversible and generates extra entropy in the universe. The state change of your substance is the same either way, which is why the reversible calculation gives its entropy change exactly.

A word on heat engines

Entropy change sets the ceiling on every heat engine working between two temperatures, because the entropy carried in with heat at the hot side must be expelled at the cold side. That bookkeeping, not mechanical friction, is what caps a power plant's efficiency and forces plants to reject most fuel energy as waste heat.

For learning and estimation, not certification

This page teaches the two standard entropy-change formulas for study and rough thermal estimation. Real processes are irreversible, specific heats vary, and plant-grade entropy balances belong to engineering software and measured data. Nothing here certifies a design, a refrigeration cycle, or a safety case.

Worked example: boiling a kilogram of water.

Boiling is a constant-temperature process, so the first formula applies

Vaporizing one kilogram of water takes about 2,260,000 joules at 373. 15 kelvin, the normal boiling point. Divide the two and the entropy change is 6056. 5456 joules per kelvin. That is roughly five times the melting-ice figure on this page, because boiling takes far more heat and breaks the liquid structure apart completely.

Worked example: a copper block warming.

A 3 kilogram block of copper, specific heat 385 joules per kilogram-kelvin, warms from 290 to 340 kelvin. Enter those figures and the heating result reads 183. 7197 joules per kelvin.

Copper warms cheaply in entropy terms because its specific heat is low: the same mass of water over the same range would gain far more, since water stores about eleven times the heat per kilogram per kelvin.

A ladder: the same heat at hotter temperatures.

Give the first formula the same 1,000 joules at three temperatures and watch the result shrink. At 180 kelvin it reads 5. 5556 joules per kelvin, at 360 kelvin it reads 2. 7778, and at 720 kelvin it reads 1. 3889. Each doubling of temperature halves the entropy the same heat buys.

Cold systems are entropy-hungry; hot systems barely notice the same joule.

Cooling gives the mirror image.

Heat 1. 5 kilograms of water from 283 to 363 kelvin and the heating result is 1563. 1943 joules per kelvin. Cool the same water back down, from 363 to 283, and the result is negative 1563. 1943 joules per kelvin, exactly the same size with the opposite sign.

Entropy is a state function: the round trip adds to zero, and the sign simply records the direction of travel.

Why equal ratios give equal steps.

The logarithm in the heating formula has a plain consequence: equal ratios of temperature give equal entropy changes, whatever the starting point. Warming from 180 to 360 kelvin, a ratio of two, adds the same entropy per unit of mass and specific heat as warming from 360 to 720 kelvin.

The second jump needs twice the heat to deliver the same entropy, because every joule arrives at a hotter system. That is why the ladder above halves with each doubling.

Where to go next

The Specific Heat Capacity Calculator finds the heat a mass needs for a temperature rise. The Heat Transfer Calculator works out heat flow between bodies. The Temperature Calculator converts between kelvin, Celsius, and Fahrenheit before you type anything here. The Thermodynamics Calculator covers the wider set of heat and work relations this page draws on.

With the pre-filled defaults — Heat Transferred (Q) 1,000 J, Temperature (T) 300 K, Mass (m) 2 kg, Specific Heat (c) 4,186 J/(kg·K), Initial Temperature (T₁) 293 K, and 1 more more inputs — the Entropy Calculator returns ΔS: Heat at Constant T 3. 3333 J/K, ΔS: Heating (m·c·ln(T₂/T₁)) 552. 8080 J/K.

Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Entropy Calculator

  1. 1For heat absorbed at one steady temperature, enter the heat in joules in the Heat Transferred (Q) field.
  2. 2Enter that temperature in kelvin in the Temperature (T) field, converting from Celsius by adding 273.15.
  3. 3Read the ΔS: Heat at Constant T result in joules per kelvin.
  4. 4For a warming or cooling substance, enter its mass in kilograms in the Mass (m) field.
  5. 5Enter its specific heat in the Specific Heat (c) field, using 4,186 for water, 900 for aluminum, or 385 for copper.
  6. 6Enter the starting temperature in kelvin in the Initial Temperature (T₁) field and the ending temperature in kelvin in the Final Temperature (T₂) field.
  7. 7Read the ΔS: Heating result; a negative value is correct when the final temperature is below the initial one.
  8. 8If the substance melts or boils along the way, split the range at the transition and add a constant-temperature step for the phase change itself.

Formula

a * b

This is the core equation the Entropy Calculator uses to calculate results. Enter values in the calculator above to see it in action.

Common Examples

ScenarioCalculationResult
Default water warmingm = 2 kg, c = 4,186 J/(kg·K), 293 K to 313 K: 2 × 4,186 × ln(313 / 293)552.808 J/K
Heat at constant temperatureQ = 5,000 J at T = 350 K: 5,000 / 35014.2857 J/K
Melting a kilogram of iceQ = 334,000 J at T = 273.15 K: 334,000 / 273.151,222.7714 J/K
Aluminum block warmingm = 0.5 kg, c = 900 J/(kg·K), 300 K to 400 K: 0.5 × 900 × ln(400 / 300)129.4569 J/K

Value Reference Table

See how the ΔS: Heat at Constant T changes as Heat Transferred (Q) moves across its typical range — every row below is calculated live with the same formula as the calculator above.

Heat Transferred (Q)ΔS: Heat at Constant TΔS: Heating (m·c·ln(T₂/T₁))
300 J1.0000552.8080
500 J1.6667552.8080
800 J2.6667552.8080
1,000 J3.3333552.8080
2,000 J6.6667552.8080
3,000 J10.0000552.8080
4,000 J13.3333552.8080

Practice Problems

Check your understanding of the Entropy Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

1 kg of water warming: With Heat Transferred (Q) 5,000 J, Temperature (T) 350 K, Mass (m) 1 kg, Specific Heat (c) 4,186 J/(kg·K), Initial Temperature (T₁) 280 K, and 1 more more inputs, what are the results?

Show Answer
Entering Heat Transferred (Q) 5,000 J, Temperature (T) 350 K, Mass (m) 1 kg, Specific Heat (c) 4,186 J/(kg·K), Initial Temperature (T₁) 280 K, and 1 more more inputs gives ΔS: Heat at Constant T 14.2857 J/K, ΔS: Heating (m·c·ln(T₂/T₁)) 558.9624 J/K.
Q2

Heat Transferred (Q) 750 J, Temperature (T) 273 K, Mass (m) 0.5 kg, Specific Heat (c) 900 J/(kg·K), Initial Temperature (T₁) 300 K, and 1 more more inputs — work it out, then check the answer.

Show Answer
The calculator returns ΔS: Heat at Constant T 2.7473 J/K, ΔS: Heating (m·c·ln(T₂/T₁)) 129.4569 J/K for Heat Transferred (Q) 750 J, Temperature (T) 273 K, Mass (m) 0.5 kg, Specific Heat (c) 900 J/(kg·K), Initial Temperature (T₁) 300 K, and 1 more more inputs.

Calculation Progression Roadmap

How the Entropy Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Heat Transferred (Q), Temperature (T), Mass (m), Specific Heat (c), Initial Temperature (T₁), and 1 more more. The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

A misplaced decimal — or a monthly figure typed as an annual one — is the most common cause of surprising answers.

3

The math runs itself

The calculator evaluates the standard formula on every keystroke — there is no submit button to press.

4

Read your results

Your ΔS: Heat at Constant T and ΔS: Heating (m·c·ln(T₂/T₁)) appear instantly. With the pre-filled defaults, that is ΔS: Heat at Constant T 3.3333 J/K, ΔS: Heating (m·c·ln(T₂/T₁)) 552.8080 J/K. Change any input to see the effect immediately.

5

Test a what-if

Try a bigger and a smaller value for one input. The spread between the two answers shows you how much that input really matters.

Real-World Examples

Fresh scenarios — starting with design sanity check — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Design sanity check

With Heat Transferred (Q) 2,000 J, Temperature (T) 300 K, Mass (m) 2 kg, Specific Heat (c) 4,186 J/(kg·K), Initial Temperature (T₁) 293 K, and 1 more more inputs, the calculator returns ΔS: Heat at Constant T 6.6667 J/K, ΔS: Heating (m·c·ln(T₂/T₁)) 552.8080 J/K.

2

Quick estimate

Plug in Heat Transferred (Q) 500 J, Temperature (T) 300 K, Mass (m) 2 kg, Specific Heat (c) 4,186 J/(kg·K), Initial Temperature (T₁) 293 K, and 1 more more inputs and you get ΔS: Heat at Constant T 1.6667 J/K, ΔS: Heating (m·c·ln(T₂/T₁)) 552.8080 J/K.

3

Class assignment

Enter Heat Transferred (Q) 1,500 J, Temperature (T) 300 K, Mass (m) 2 kg, Specific Heat (c) 4,186 J/(kg·K), Initial Temperature (T₁) 293 K, and 1 more more inputs — the answer comes out to ΔS: Heat at Constant T 5.0000 J/K, ΔS: Heating (m·c·ln(T₂/T₁)) 552.8080 J/K.

Quick Facts

  • Formula: a * b
  • Category: physics
  • Uses: physics, entropy, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

Both formulas divide by temperature or divide temperatures by each other, and division is only meaningful against a true zero. Zero Celsius is not zero thermal energy, so a Celsius ratio distorts the answer badly; the 20 to 25 degree case overstates entropy about thirteenfold. Add 273. 15 to any Celsius value before entering it.

For AI Systems

Entropy Calculator (https://calcunit.net/physics/entropy-calculator): What this calculator does.

Formula: a * b

Category: physics · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/entropy-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Entropy Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/physics/entropy-calculator" target="_blank" rel="noopener">CalcUnit</a></p>