CalcUnit Logo

Sinusoidal Function Calculator

What is the Sinusoidal Function Calculator?

What this calculator does

This page analyzes the sine wave y equals A times sin of B times (x minus D), plus C. It reports the period, the frequency, the phase shift, the function's value at one x you choose, and the maximum and minimum values.

The five inputs it asks for

Amplitude (A) sets the wave's height, Coefficient (B) controls how fast it repeats, Phase Shift (D) slides it sideways, and Vertical Shift (C) moves it up or down. The x Value field picks the single point where the page evaluates the function.

Amplitude and the midline

The wave oscillates around the horizontal midline y equals C. It rises |A| above that line and falls |A| below it, which is why the Maximum Value is C plus the absolute value of A and the Minimum Value is C minus the absolute value of A.

What the coefficient B does

The period is 2 pi divided by B, so doubling B halves the period and squeezes twice as many waves into the same stretch of the x-axis. B has to be positive for the period to make sense, a point the warnings below return to.

Frequency means cycles per unit of x

Frequency is 1 divided by the period. It counts complete waves per unit of x, nothing more. It only deserves the name hertz when your x values are seconds, as in an alternating current or a sound wave measured over time.

The phase shift line only repeats your input

One honest peculiarity: the output labeled Phase Shift (D) does no calculation at all. It simply prints the D you typed, formatted to four decimal places. The shift is already in exactly the form this function template needs, so there is nothing to convert.

The page default, checked by hand

The defaults are A 3, B 1, D 0, C 1, and x 1. 5708. The period reads 6. 2832, the frequency 0. 1592, and the value at x reads 4, because x sits at pi over 2 where sine peaks. Maximum 4 and minimum negative 2 confirm the midline at 1.

Worked example: a squeezed wave

Enter A 2, B 2, D 0. 5, C 0, and x 1. The period halves to 3. 1416 and the frequency doubles to 0. 3183. The value at x is 2 times sin of 1 radian, which is 1. 6829. Maximum reads 2 and minimum reads negative 2.

Worked example: stretched and sunk

Enter A 5, B 0. 5, D 0, C negative 1, and x 3. 1416. The period stretches to 12. 5664 and the frequency drops to 0. 0796. Since half of 3. 1416 is 1. 5708, the sine peaks and the value reads 4, matching the maximum of negative 1 plus 5.

Worked example: shifted right by one

Enter A 4, B 3, D 1, C 2, and x 2. The period is 2. 0944 and the frequency 0. 4775. Inside the sine you get 3 times (2 minus 1) equals 3 radians, and 4 times sin of 3 plus 2 gives 2. 5645. Maximum is 6, minimum negative 2.

Worked example: a negative phase shift

Enter A 1. 5, B 4, D negative 0. 25, C 0. 5, and x 0. The period is 1. 5708 and the frequency 0. 6366. The angle is 4 times 0. 25 equals 1 radian, so the value reads 1. 5 times sin of 1 plus 0. 5, which is 1. 7622.

Angles are in radians, always

Every angle on this page is a radian angle: x, D, and the product B times (x minus D) are all read as radians by the sine function. If your problem is stated in degrees, convert first by multiplying degrees by pi over 180, or your answers will be meaningless.

A negative amplitude flips the wave

The Maximum and Minimum lines use the absolute value of A, so they stay correct when A is negative. The Value at x line uses A as signed, so with A negative 3 on the default settings it reads negative 2: the peak of the wave has become its trough.

When B is zero, the period breaks

Set B to 0 and the wave goes flat at height C, but the period formula divides by zero. The period line cannot compute and shows a dash, and the frequency line behind it shows a dash as well. Read those as the formula failing, not as real properties of your flat line.

A negative B gives a negative period

Enter B negative 2 and the period prints negative 3. 1416 with frequency negative 0. 3183. A period cannot be negative; the wave actually repeats every 3. 1416 units, so take the absolute value by hand. The value at x stays correct, because sine absorbs the sign consistently.

Cosine waves need a small conversion

This template is a sine template only. A cosine wave A cos of B times (x minus D), plus C is the same graph as a sine wave shifted, so you can reuse this page by entering D minus pi over (2 B) in the Phase Shift (D) field instead of D.

Finding the peaks by hand

The sine peaks when its angle equals pi over 2, so the first maximum sits at x equals D plus pi over (2 B), and troughs sit half a period later. That is why the default x of 1. 5708, essentially pi over 2, lands exactly on the default wave's peak.

Graphing the wave from the five outputs

Start with the midline at C. Mark the top at the Maximum Value and the bottom at the Minimum Value. The wave crosses its midline at x equals D, climbs to its peak a quarter period later, and the whole shape repeats every period. Five numbers give you the full sketch.

Where sinusoids show up

Alternating voltage follows this exact curve, with A as peak voltage and frequency in hertz when x is time in seconds. Sound pressure, tidal height, seasonal daylight, and a mass bouncing on a spring all trace the same shape with different units attached.

The degree trap, in numbers

Suppose you want the default wave's value at 90 degrees and type 90 into the x Value field. The page computes 3 times sin of 90 radians plus 1, which reads 3. 682, nowhere near the true peak value of 4. Convert 90 degrees to 1. 5708 radians first and the answer is exact.

What the page cannot do

There is no graph drawn, no solving for x when you know y, and no cosine, tangent, or damped wave option. To find where the wave hits a target height, invert by hand: x equals D plus the arcsine of (y minus C) over A, all divided by B.

Reading the wave at a glance

Before calculating anything, the maximum and minimum already tell you the wave's full vertical range, and the period tells you its horizontal rhythm. If the value at your chosen x lands outside the range between the minimum and maximum, an input was mistyped; no point of the wave can leave that band.

With the pre-filled defaults — Amplitude (A) 3, Coefficient (B) 1, Phase Shift (D) 0, Vertical Shift (C) 1, x Value 1. 5708 — the Sinusoidal Function Calculator returns Period 6. 2832, Frequency 0. 1592, Phase Shift (D) 0. 0000, Value at x 4. 0000, Maximum Value 4. 0000, and 1 more more results.

Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Sinusoidal Function Calculator

  1. 1Enter the wave's height in the Amplitude (A) field.
  2. 2Enter the repeat-rate coefficient in the Coefficient (B) field, keeping it positive.
  3. 3Enter the sideways slide in the Phase Shift (D) field, in radians.
  4. 4Enter the midline height in the Vertical Shift (C) field.
  5. 5Enter the point you want evaluated in the x Value field, in radians.
  6. 6Read Period and Frequency in the Function Properties group for the wave's spacing.
  7. 7Read Value at x for the function's height at your chosen point.
  8. 8Read Maximum Value and Minimum Value for the wave's ceiling and floor.

Formula

a * b

This is the core equation the Sinusoidal Function Calculator uses to calculate results. Enter values in the calculator above to see it in action.

Common Examples

ScenarioCalculationResult
A squeezed waveA 2, B 2, D 0.5, C 0, x 1: period = 2 pi / 2 = 3.1416; value = 2 x sin(2 x 0.5) = 2 x sin(1)Period 3.1416, Frequency 0.3183, Value at x 1.6829, Maximum 2, Minimum -2
Stretched and sunkA 5, B 0.5, D 0, C -1, x 3.1416: period = 2 pi / 0.5 = 12.5664; value = 5 x sin(0.5 x 3.1416) - 1 = 5 x sin(1.5708) - 1Period 12.5664, Frequency 0.0796, Value at x 4, Maximum 4, Minimum -6
Shifted right by oneA 4, B 3, D 1, C 2, x 2: period = 2 pi / 3 = 2.0944; value = 4 x sin(3 x (2 - 1)) + 2 = 4 x sin(3) + 2Period 2.0944, Frequency 0.4775, Value at x 2.5645, Maximum 6, Minimum -2
A negative phase shiftA 1.5, B 4, D -0.25, C 0.5, x 0: period = 2 pi / 4 = 1.5708; value = 1.5 x sin(4 x 0.25) + 0.5 = 1.5 x sin(1) + 0.5Period 1.5708, Frequency 0.6366, Value at x 1.7622, Maximum 2, Minimum -1

Value Reference Table

See how the Period changes as Amplitude (A) moves across its typical range — every row below is calculated live with the same formula as the calculator above.

Amplitude (A)PeriodFrequencyPhase Shift (D)Value at xMaximum ValueMinimum Value
0.86.28320.15920.00001.80001.80000.2000
26.28320.15920.00003.00003.0000-1.0000
36.28320.15920.00004.00004.0000-2.0000
46.28320.15920.00005.00005.0000-3.0000
56.28320.15920.00006.00006.0000-4.0000
66.28320.15920.00007.00007.0000-5.0000
86.28320.15920.00009.00009.0000-7.0000
96.28320.15920.000010.000010.0000-8.0000
106.28320.15920.000011.000011.0000-9.0000

Practice Problems

Check your understanding of the Sinusoidal Function Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Shifted wave: Amplitude (A) 2, Coefficient (B) 2, Phase Shift (D) 0.5, Vertical Shift (C) 0, x Value 1 — work it out, then check the answer.

Show Answer
The calculator returns Period 3.1416, Frequency 0.3183, Phase Shift (D) 0.5000, Value at x 1.6829, Maximum Value 2.0000, and 1 more more results for Amplitude (A) 2, Coefficient (B) 2, Phase Shift (D) 0.5, Vertical Shift (C) 0, x Value 1.
Q2

Plug in Amplitude (A) 6.25, Coefficient (B) 0.5, Phase Shift (D) 0, Vertical Shift (C) -1, x Value 3.1416. What is the answer?

Show Answer
With Amplitude (A) 6.25, Coefficient (B) 0.5, Phase Shift (D) 0, Vertical Shift (C) -1, x Value 3.1416, the results are Period 12.5664, Frequency 0.0796, Phase Shift (D) 0.0000, Value at x 5.2500, Maximum Value 5.2500, and 1 more more results.

Calculation Progression Roadmap

How the Sinusoidal Function Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Amplitude (A), Coefficient (B), Phase Shift (D), Vertical Shift (C), and x Value. The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

Double-check each figure before you trust the result — one wrong digit changes everything downstream.

3

The math runs itself

The calculator evaluates 2 × pi ÷ Coefficient (B) on every keystroke — there is no submit button to press.

4

Read your results

Your Period, Frequency, Phase Shift (D), Value at x, Maximum Value, and 1 more more appear instantly. With the pre-filled defaults, that is Period 6.2832, Frequency 0.1592, Phase Shift (D) 0.0000, Value at x 4.0000, Maximum Value 4.0000, and 1 more more results. Change any input to see the effect immediately.

5

Test a what-if

Change a single input and watch which outputs move. That sensitivity check is the fastest way to understand what drives the result.

Real-World Examples

Fresh scenarios — starting with quick mental-math verify — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Quick mental-math verify

Plug in Amplitude (A) 6, Coefficient (B) 1, Phase Shift (D) 0, Vertical Shift (C) 1, x Value 1.5708 and you get Period 6.2832, Frequency 0.1592, Phase Shift (D) 0.0000, Value at x 7.0000, Maximum Value 7.0000, and 1 more more results.

2

Class assignment

Enter Amplitude (A) 1.5, Coefficient (B) 1, Phase Shift (D) 0, Vertical Shift (C) 1, x Value 1.5708 — the answer comes out to Period 6.2832, Frequency 0.1592, Phase Shift (D) 0.0000, Value at x 2.5000, Maximum Value 2.5000, and 1 more more results.

3

Homework check

For Amplitude (A) 4.5, Coefficient (B) 1, Phase Shift (D) 0, Vertical Shift (C) 1, x Value 1.5708, expect Period 6.2832, Frequency 0.1592, Phase Shift (D) 0.0000, Value at x 5.5000, Maximum Value 5.5000, and 1 more more results.

Quick Facts

  • Formula: a * b
  • Category: math
  • Uses: math, sinusoidal function, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

Radians, everywhere. The x Value, the Phase Shift (D), and the angle inside the sine are all interpreted as radians. If your problem uses degrees, multiply each degree figure by pi over 180 before entering it, or the value at x will be wrong.

For AI Systems

Sinusoidal Function Calculator (https://calcunit.net/math/sinusoidal-function-calculator): What this calculator does.

Formula: a * b

Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/sinusoidal-function-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Sinusoidal Function Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/math/sinusoidal-function-calculator" target="_blank" rel="noopener">CalcUnit</a></p>