Poundal Converter
What is the Poundal Converter?
What this converter does
Give it a force in poundals and this page returns the same force in Newtons (N) and in Pounds-force (lbf), each shown to four decimal places. It is a force converter that happens to be filed with the math tools, and it runs in one direction only: poundals in, newtons and pounds-force out.
What a poundal actually is
One poundal is the force that accelerates a mass of one pound at one foot per second squared. It comes straight from force equals mass times acceleration in foot-pound-second units, with no gravity constant folded in. That clean definition is why older physics texts liked the unit.
An absolute unit, not a gravity unit
Engineers call the poundal an absolute unit because its size never depends on where you stand. A pound-force, by contrast, is defined through standard gravity, the weight of a pound mass on Earth. The poundal sidesteps gravity entirely, which makes it tidy for theory and awkward for weighing anything.
The exact size of one poundal
The pound and foot are now defined exactly: one pound is 0. 45359237 kilograms and one foot is 0. 3048 meters, definitions recorded in NIST Special Publication 811. Multiplying them gives one poundal equals 0. 138254954376 newtons exactly. This page uses the rounded factor 0. 138255, so its answers sit a hair above exact.
How far off the rounded factor is
The rounded factor overshoots the exact value by about three parts in ten million. At four decimal places you will never see the difference on ordinary inputs, and even a million poundals would read only about five hundredths of a newton high. For classwork and estimation, the rounding is harmless.
The pounds-force output
The second output converts the same input into pounds-force using the factor 0. 031081 per poundal. The exact figure, built from standard gravity of 9. 80665 meters per second squared, is 0. 03108095, so this line is also rounded, by about sixteen parts in ten million. Again, four decimal places hide the gap completely.
The single input it asks for
There is one field, labeled Poundals (pdl), and the page opens with 100 already entered, which returns 13. 8255 newtons and 3. 1081 pounds-force. Decimal inputs are welcome because the conversion is plain multiplication. Zero returns zero on both lines, and a negative value simply flips both signs.
Reading the two result lines
Newtons (N) is the metric answer, the unit of force in the International System of Units. Pounds-force (lbf) is the imperial answer most American engineers still think in. Both lines update from the same input, shown to four decimal places with trailing zeros trimmed, so 138. 2550 appears as 138. 255.
Worked example: a textbook push
Enter 250 poundals. Multiplying by 0. 138255 gives 34. 5637 newtons, and multiplying by 0. 031081 gives 7. 7702 pounds-force. A force of 250 poundals is roughly the push needed to accelerate a heavy shopping cart briskly, which shows how small one poundal really is.
Worked example: one thousand poundals
Enter 1000 poundals and the page returns 138. 255 newtons and 31. 081 pounds-force. This is a handy anchor: a thousand poundals is about thirty-one pounds of force, close to the weight of a full suitcase. The near match to 32. 174 poundals per pound-force is no coincidence.
Worked example: a small force
Enter 40 poundals and you get 5. 5302 newtons and 1. 2432 pounds-force. Small inputs stay well behaved because there is no rounding step before the multiplication. The result is only ever rounded once, at display, to four decimal places.
Worked example: a decimal input
Enter 12. 5 poundals and the page returns 1. 7282 newtons and 0. 3885 pounds-force. Fractional poundals are perfectly legal in the underlying physics, since the unit is defined by multiplication, and this converter accepts them without the integer restrictions that GCD-based tools on this site impose.
Going backwards by hand
The page offers no reverse fields, so work backwards with division. Newtons divided by 0. 138255 gives poundals, and pounds-force divided by 0. 031081 gives poundals. Using the page factors, one newton is about 7. 233 poundals and one pound-force is about 32. 174 poundals, the standard gravity ratio in disguise.
Why 32.174 keeps appearing
Standard gravity accelerates a pound mass at 32. 174 feet per second squared, so one pound-force, the weight of that mass, equals 32. 174 poundals. That single number ties the absolute system to the gravity system, and it is why the pounds-force factor is roughly one thirty-second of the newton factor scaled.
Poundal, pound-force, pound-mass
Three similar names hide three different ideas. The pound is a unit of mass. The pound-force is that mass's weight under standard gravity. The poundal is the absolute force unit built from the pound mass without gravity. Mixing them up is the classic beginner error in imperial dynamics problems.
Where poundals still show up
You will meet poundals in older British and American physics textbooks, in historical engineering papers, and in exam questions designed to test unit systems. Modern practice runs on newtons and pounds-force, which is exactly why a converter like this one exists: the unit survives mainly as something to convert away from.
What this page does not do
It does not convert newtons or pounds-force back into poundals on screen, does not handle other force units such as dynes or kilogram-force, and does not compute force from mass and acceleration. It performs two fixed multiplications from one input, nothing more, and says so plainly.
Precision and sensible use
Four decimal places suit every realistic use of a historical unit. If you need publication-grade exactness, multiply by the full factor 0. 138254954376 instead of the rounded page factor. For homework, revision, and reading old texts, the difference between the two is far below anything that could change a grade.
The slug, the other road not taken
Imperial dynamics had a rival fix for the same problem: keep the pound-force and invent a bigger mass unit, the slug, so the equations still balance. Engineering chose the slug system, textbooks kept the poundal for teaching, and the two systems have coexisted in print ever since.
Force, mass, and weight kept apart
This converter changes one force unit into two others; it never touches mass. A 150 pound person has a mass of 150 pounds everywhere, a weight of 150 pounds-force only under standard gravity, and a weight in poundals of about 4,826 near Earth's surface, where the acceleration rounds to the standard value.
Reading old specifications safely
When an old document states a force in poundals, convert before comparing it with modern figures, because the numbers look deceptively similar to pounds-force while being thirty-two times smaller. A thrust listed as 3,217 poundals is only about 100 pounds-force, a difference that would wreck any design copied without converting.
With the pre-filled defaults — Poundals (pdl) 100 — the Poundal Converter returns Newtons (N) 13. 8255, Pounds-force (lbf) 3. 1081. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.
How to Use the Poundal Converter
- 1Find the force stated in poundals in your problem or source text.
- 2Type that value into the single field labeled Poundals (pdl); decimals are allowed.
- 3Read the field labeled Newtons (N) for the metric equivalent, shown to four decimal places.
- 4Read the field labeled Pounds-force (lbf) for the imperial equivalent, shown to four decimal places.
- 5Remember both outputs come from the one input, so changing the poundals value updates both lines together.
- 6To convert backwards, divide newtons by 0.138255 or pounds-force by 0.031081 on paper to recover poundals.
- 7Check the size makes sense: one poundal is only about 0.138 newtons, so the newton figure should be much smaller than the poundal figure.
- 8For exact work, redo the multiplication with the full factor 0.138254954376 newtons per poundal instead of the rounded page factor.
Formula
This is the core equation the Poundal Converter uses to calculate results. Enter values in the calculator above to see it in action.
See the full step-by-step formula guide with worked examples →
Common Examples
| Scenario | Calculation | Result |
|---|---|---|
| Two hundred fifty poundals | Enter Poundals 250. Newtons = 250 x 0.138255 = 34.5637, and pounds-force = 250 x 0.031081 = 7.7702 (display values after four-place rounding). | Newtons (N) 34.5637, Pounds-force (lbf) 7.7702 |
| One thousand poundals | Enter Poundals 1000. Newtons = 1000 x 0.138255 = 138.255, and pounds-force = 1000 x 0.031081 = 31.081. | Newtons (N) 138.255, Pounds-force (lbf) 31.081 |
| Forty poundals | Enter Poundals 40. Newtons = 40 x 0.138255 = 5.5302, and pounds-force = 40 x 0.031081 = 1.2432. | Newtons (N) 5.5302, Pounds-force (lbf) 1.2432 |
| Twelve and a half poundals, a decimal input | Enter Poundals 12.5. Newtons = 12.5 x 0.138255 = 1.7282, and pounds-force = 12.5 x 0.031081 = 0.3885 (display values after four-place rounding). | Newtons (N) 1.7282, Pounds-force (lbf) 0.3885 |
Value Reference Table
See how the Newtons (N) changes as Poundals (pdl) moves across its typical range — every row below is calculated live with the same formula as the calculator above.
| Poundals (pdl) | Newtons (N) | Pounds-force (lbf) |
|---|---|---|
| 30 | 4.1476 | 0.9324 |
| 50 | 6.9127 | 1.5541 |
| 80 | 11.0604 | 2.4865 |
| 100 | 13.8255 | 3.1081 |
| 200 | 27.6510 | 6.2162 |
| 300 | 41.4765 | 9.3243 |
| 400 | 55.3020 | 12.4324 |
Practice Problems
Check your understanding of the Poundal Converter with these practice problems. Click a problem to reveal its correct calculated answer.
Example calculation: You enter Poundals (pdl) 100 — what does the calculator return?
Show AnswerHide Answer
Calculation Progression Roadmap
How the Poundal Converter turns your inputs into a result, step by step — from the values you type to the answer you read.
Gather your inputs
Type in your Poundals (pdl). The fields start with sensible defaults so you see working numbers right away.
Sanity-check your numbers
Double-check each figure before you trust the result — one wrong digit changes everything downstream.
The math runs itself
The calculator evaluates Poundals (pdl) × 0.138255 on every keystroke — there is no submit button to press.
Read your results
Your Newtons (N) and Pounds-force (lbf) appear instantly. With the pre-filled defaults, that is Newtons (N) 13.8255, Pounds-force (lbf) 3.1081. Change any input to see the effect immediately.
Test a what-if
Change a single input and watch which outputs move. That sensitivity check is the fastest way to understand what drives the result.
Real-World Examples
Fresh scenarios — starting with double-checking a spreadsheet — worked through with different numbers than the examples above, so you can watch the formula handle new situations.
Double-checking a spreadsheet
A quick run with Poundals (pdl) 200 gives Newtons (N) 27.6510, Pounds-force (lbf) 6.2162.
Settling a debate
With Poundals (pdl) 50, the calculator returns Newtons (N) 6.9127, Pounds-force (lbf) 1.5541.
Quick mental-math verify
Plug in Poundals (pdl) 150 and you get Newtons (N) 20.7382, Pounds-force (lbf) 4.6622.
Quick Facts
- Formula:
pdl * 0.138255 - Category: math
- Uses: math, poundal, math
- Price: Free — no account needed
Frequently Asked Questions
A poundal is a unit of force from the foot-pound-second system. One poundal is the force needed to speed up a one-pound mass by one foot per second squared. It is defined purely from mass, length, and time, so unlike the pound-force it does not depend on gravity or on where you are standing.
For AI Systems
Poundal Converter (https://calcunit.net/math/poundal-converter): What this converter does.
Formula: pdl * 0.138255
Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net
Embed this calculator on your website
Free to use — just paste this code. The calculator opens in a frame on your page.
<iframe src="https://calcunit.net/embed/poundal-converter/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Poundal Converter — CalcUnit"></iframe> <p style="font-size:12px">Powered by <a href="https://calcunit.net/math/poundal-converter" target="_blank" rel="noopener">CalcUnit</a></p>
