CalcUnit Logo

Obtuse Triangle Calculator

What is the Obtuse Triangle Calculator?

What this calculator does

Type three side lengths and this page checks whether the triangle they form is obtuse. It reports the semiperimeter, the area from Heron's formula, the largest angle in degrees, and a 1 or 0 verdict on the Is Obtuse line. Three sides in, one classification out.

What makes a triangle obtuse

A triangle is obtuse when one of its angles is greater than 90 degrees. That wide angle forces the other two to be acute, because all three angles must sum to 180. A triangle can hold at most one obtuse angle, and the longest side always sits opposite it.

The three inputs it asks for

Side A, Side B, and Side C are the inputs, and Side C is labeled longest for a reason: the test and the angle both assume C is the biggest side. The page opens with 2, 3, and 4. Keep the longest length in the C field every time.

The squares test behind the verdict

The test compares c² with a² + b², the converse of the Pythagorean theorem. If c² is larger, the angle opposite C opens past 90 degrees and the triangle is obtuse. If they are equal, the triangle is right; if c² is smaller, every angle is acute.

The is obtuse line

Is Obtuse prints 1 when a² + b² is strictly less than c², and 0 otherwise. Strictly matters: exact equality is a right triangle and earns a 0, not a 1. The line reads like a yes or no code, 1 for obtuse, 0 for right or acute.

The semiperimeter line

Semiperimeter adds the three sides and halves the total: (a + b + c) over 2. For 2, 3, and 4 it reads 4. 5. It is not the perimeter itself; it is the working ingredient Heron's formula needs, printed so you can follow the area computation step by step.

The Heron area line

Area (Heron) computes the area from sides alone: the square root of s(s − a)(s − b)(s − c), with s the semiperimeter. No height is needed, which is why this formula suits a sides only page. If the product ever goes negative, the line clamps to 0.

The largest angle line

Largest Angle (opposite Side C) applies the law of cosines: acos of (a² + b² − c²) over 2ab, converted to degrees. The cosine input is clamped between negative 1 and 1 before the arccosine runs. If Side A or Side B is 0, the line shows a guarded 0 instead.

Worked example: the page default

Enter Side A 2, Side B 3, and Side C 4. Semiperimeter reads 4. 5, Area (Heron) reads 2. 9047, and Largest Angle reads 104. 4775 degrees. Is Obtuse reads 1, because 4 + 9, which is 13, falls short of 16. A modest triangle with a clearly wide corner.

Worked example: an acute triangle

Enter 4, 5, and 6. Semiperimeter reads 7. 5, Area reads 9. 9216, and Largest Angle reads 82. 8192 degrees. Is Obtuse reads 0, because 16 + 25, which is 41, beats 36. Every angle in this triangle is under 90 degrees, and the largest one proves it.

Worked example: the right triangle boundary

Enter 5, 12, and 13. Semiperimeter reads 15, Area reads exactly 30, and Largest Angle reads exactly 90 degrees. Is Obtuse still reads 0, because 25 + 144 equals 169 exactly. Right triangles sit on the border, and this page counts them as not obtuse.

Worked example: a wide flat triangle

Enter 6, 7, and 11. Semiperimeter reads 12, Area reads 18. 9737, and Largest Angle reads 115. 3769 degrees. Is Obtuse reads 1, because 36 + 49, which is 85, falls well short of 121. The long side 11 stretches the corner opposite it far past square.

Side C must really be the longest

Enter the same 2, 3, 4 triangle in the wrong order, as 4, 3, 2, and the page misreads it. Is Obtuse computes 16 + 9 against 4 and reports 0, and Largest Angle reports 28. 955 degrees, the angle opposite the side 2. The true 104. 4775 degree verdict is lost.

Impossible triangles still print numbers

The page never checks the triangle inequality, so sides 2, 3, and 9, which cannot form a triangle, still print results: Semiperimeter 7, Area 0 after its clamp, Largest Angle 180 degrees after its clamp, and Is Obtuse 1. Area 0 beside a 180 degree angle is the fingerprint of impossible input.

Zero and negative sides are meaningless

A zero in Side A or Side B sends the Largest Angle line to its guarded 0, while Is Obtuse may still print 1 and the area clamps to 0. Negative sides corrupt every line at once. Real triangles have three positive sides, so treat any zero input as a typing error.

Finding the other two angles by hand

Apply the law of cosines at each corner, or use the law of sines once one angle is known. The angles must total 180, a free check: the default triangle's other two are about 46. 5675 and 28. 955 degrees, and all three sum to 180.

Classifying a triangle by hand

Square the longest side and square and add the other two. Compare the results: greater means obtuse, equal means right, less means acute. No trigonometry is required for the classification itself. The angles and area are extras; the squares test alone settles the question this page is named for.

Right and acute share the zero

The Is Obtuse line separates obtuse triangles from everything else, so right and acute triangles both read 0. To tell those two apart, look at the Largest Angle line: exactly 90 degrees means right, anything under means acute. The verdict line and the angle line are designed to be read together.

Why Heron instead of base times height

The familiar half base times height needs a height, and an obtuse triangle's height to its longest side falls inside, while heights to the short sides fall outside the shape entirely. Given only three sides, no height is known. Heron's formula sidesteps the problem by using the sides and semiperimeter directly.

Where obtuse triangles appear

Roof trusses lean on obtuse corners where a shallow pitch meets a long span. Ramps, braces, and triangular land plots often hide one wide angle. In navigation, a turn past 90 degrees changes how bearings combine. Recognizing the shape early tells you which formulas behave and which need care.

Units and scaling

All three sides must share one unit; the area then comes out in that unit squared, and angles are unit free. Scaling every side by the same factor leaves the verdict and angles unchanged while the area grows by the factor squared. A 2, 3, 4 triangle and a 4, 6, 8 triangle classify identically.

Precision near the right angle border

The verdict uses unrounded squares, while the angle prints to four decimal places. A triangle whose true largest angle is 89. 99996 degrees displays as 90 but still reads Is Obtuse 0 correctly, and one at 90. 00004 does the reverse. Near the border, trust the flag over the rounded angle.

What this page does not do

It reports no perimeter beyond the semiperimeter, no second or third angle, no heights, and no circumradius. It never validates that the sides can form a triangle at all. Three side lengths in, a classification, an area, and the largest angle out: that is the honest extent of the page.

An obtuse triangle has exactly one wide corner

Two angles past 90 degrees would already sum past 180 before the third angle adds anything, so a second obtuse angle is impossible. That is why the whole classification reduces to one question about the largest angle, and why testing the longest side alone settles it completely.

Equilateral and isosceles cases

An equilateral triangle has three 60 degree angles and always reads Is Obtuse 0, since a² + a² beats a². An isosceles triangle can go either way: equal sides 5, 5 with base 8 give 25 + 25 under 64, so the verdict is 1 and the apex angle is wide.

A quick sanity check on the area

The area can never exceed half the product of the two shorter sides, the right triangle maximum for those sides. For 2, 3, 4 that ceiling is 3, and the reported 2. 9047 sits just under it. An area above that ceiling signals a swapped or mistyped side immediately.

With the pre-filled defaults — Side A 2, Side B 3, Side C (longest) 4 — the Obtuse Triangle Calculator returns Semiperimeter 4. 5000, Area (Heron) 2. 9047, Largest Angle (opposite Side C) 104. 4775°, Is Obtuse (1 = yes, 0 = no) 1.

Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Obtuse Triangle Calculator

  1. 1Enter the shorter side in the Side A field.
  2. 2Enter the middle side in the Side B field.
  3. 3Enter the longest side in the Side C (longest) field; the test assumes C is the biggest.
  4. 4Read the Semiperimeter line: half the sum of the three sides.
  5. 5Read the Area (Heron) line for the area computed from the sides alone.
  6. 6Read the Largest Angle (opposite Side C) line, in degrees.
  7. 7Read the Is Obtuse (1 = yes, 0 = no) line: 1 confirms an angle past 90 degrees.
  8. 8If the area reads 0 or the angle reads 180, check that the two shorter sides add up to more than the longest side.

Formula

a * b

This is the core equation the Obtuse Triangle Calculator uses to calculate results. Enter values in the calculator above to see it in action.

Common Examples

ScenarioCalculationResult
Page defaultSide A = 2, Side B = 3, Side C = 4Semiperimeter 4.5, Area (Heron) 2.9047, Largest Angle 104.4775 degrees, Is Obtuse 1
Acute triangleSide A = 4, Side B = 5, Side C = 6Semiperimeter 7.5, Area (Heron) 9.9216, Largest Angle 82.8192 degrees, Is Obtuse 0
Right triangle boundarySide A = 5, Side B = 12, Side C = 13Semiperimeter 15, Area (Heron) 30, Largest Angle 90 degrees, Is Obtuse 0
Wide flat triangleSide A = 6, Side B = 7, Side C = 11Semiperimeter 12, Area (Heron) 18.9737, Largest Angle 115.3769 degrees, Is Obtuse 1

Value Reference Table

See how the Semiperimeter changes as Side A moves across its typical range — every row below is calculated live with the same formula as the calculator above.

Side ASemiperimeterArea (Heron)Largest Angle (opposite Side C)Is Obtuse (1 = yes, 0 = no)
0.53.75000.0000180.00001
14.00000.0000180.00001
24.50002.9047104.47751
35.00004.472183.62060
45.50005.562167.97570
56.00006.000053.13010
66.50005.332736.33610
87.50000.00000.00000

Practice Problems

Check your understanding of the Obtuse Triangle Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Obtuse 3-4-6: With Side A 3, Side B 4, Side C (longest) 6, what are the results?

Show Answer
With Side A 3, Side B 4, Side C (longest) 6, the results are Semiperimeter 6.5000, Area (Heron) 5.3327, Largest Angle (opposite Side C) 117.2796°, Is Obtuse (1 = yes, 0 = no) 1.
Q2

Side A 5, Side B 5, Side C (longest) 6 — work it out, then check the answer.

Show Answer
Entering Side A 5, Side B 5, Side C (longest) 6 gives Semiperimeter 8.0000, Area (Heron) 12.0000, Largest Angle (opposite Side C) 73.7398°, Is Obtuse (1 = yes, 0 = no) 0.

Calculation Progression Roadmap

How the Obtuse Triangle Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Side A, Side B, and Side C (longest). The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

Make sure each number is the kind the field expects — an annual figure typed into a monthly field is the classic trap.

3

The math runs itself

The calculator evaluates (Side A + Side B + Side C (longest)) ÷ 2 on every keystroke — there is no submit button to press.

4

Read your results

Your Semiperimeter, Area (Heron), Largest Angle (opposite Side C), and Is Obtuse (1 = yes, 0 = no) appear instantly. With the pre-filled defaults, that is Semiperimeter 4.5000, Area (Heron) 2.9047, Largest Angle (opposite Side C) 104.4775°, Is Obtuse (1 = yes, 0 = no) 1. Change any input to see the effect immediately.

5

Test a what-if

Nudge one input up or down. Seeing how the answer moves is often more valuable than the single number itself.

Real-World Examples

Fresh scenarios — starting with settling a debate — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Settling a debate

With Side A 4, Side B 3, Side C (longest) 4, the calculator returns Semiperimeter 5.5000, Area (Heron) 5.5621, Largest Angle (opposite Side C) 67.9757°, Is Obtuse (1 = yes, 0 = no) 0.

2

Quick mental-math verify

Plug in Side A 1, Side B 3, Side C (longest) 4 and you get Semiperimeter 4.0000, Area (Heron) 0.0000, Largest Angle (opposite Side C) 180.0000°, Is Obtuse (1 = yes, 0 = no) 1.

3

Class assignment

Enter Side A 3, Side B 3, Side C (longest) 4 — the answer comes out to Semiperimeter 5.0000, Area (Heron) 4.4721, Largest Angle (opposite Side C) 83.6206°, Is Obtuse (1 = yes, 0 = no) 0.

Quick Facts

  • Formula: a * b
  • Category: math
  • Uses: math, obtuse triangle, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

It is a triangle with one angle greater than 90 degrees. The other two angles are automatically acute, since all three must sum to 180. The side opposite the wide angle is the longest side, which is why this page wants that length in the Side C field.

For AI Systems

Obtuse Triangle Calculator (https://calcunit.net/math/obtuse-triangle-calculator): What this calculator does.

Formula: a * b

Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/obtuse-triangle-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Obtuse Triangle Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/math/obtuse-triangle-calculator" target="_blank" rel="noopener">CalcUnit</a></p>