CalcUnit Logo

Light Calculator

What is the Light Calculator?

What this calculator does

This page applies the inverse square law to a point source of light or radiation. Enter the Source Power in watts and two distances in meters, and it returns the intensity at each distance in watts per square meter, plus the ratio between them. It shows how fast light thins out with distance.

The inverse square law

A source radiating equally in all directions paints its power over the surface of an expanding sphere, whose area is 4 pi times the radius squared. Double the distance and the same power covers four times the area, so each square meter receives one quarter of the intensity.

The three inputs it asks for

Source Power is the total power the source radiates, in watts. Distance 1 and Distance 2 are the two measurement distances from the source, in meters, so you can compare two spots at once. The page opens with 100 watts, 2 meters, and 4 meters filled in.

Reading the intensity lines

Intensity at Distance 1 and Intensity at Distance 2 give the power landing on each square meter at those distances, in watts per square meter. These are radiant intensities: total energy flow, including wavelengths your eye cannot see, not a measure of perceived brightness.

Reading the ratio line

Intensity Ratio (D2 / D1) compares the second distance with the first, and it always works out to (Distance 1 / Distance 2) squared. A ratio of 0. 25 means the farther spot gets a quarter of the intensity. Equal distances give a ratio of exactly 1.

Worked example: the page default

With Source Power 100, Distance 1 of 2, and Distance 2 of 4, the page reports Intensity at Distance 1 as 1. 9894, Intensity at Distance 2 as 0. 4974, and a ratio of 0. 25. Doubling the distance quartered the intensity, exactly as the law predicts.

Worked example: a household lamp

Enter Source Power 60, Distance 1 of 1, and Distance 2 of 3. The page returns 4. 7746 at one meter and 0. 5305 at three meters, with a ratio of 0. 1111. Tripling the distance cuts intensity to one ninth, which is why moving a desk lamp closer beats buying a brighter bulb.

Worked example: a bright source

Enter Source Power 1000, Distance 1 of 5, and Distance 2 of 10. Intensities read 3. 1831 and 0. 7958, and the ratio is 0. 25. Even a powerful source fades fast: ten meters out, each square meter collects under one watt of the thousand radiated.

Worked example: moving in close

Enter Source Power 10, Distance 1 of 0. 25, and Distance 2 of 1. The page gives 12. 7324 up close and 0. 7958 at a meter, a ratio of 0. 0625. Quartering the distance multiplies intensity sixteen times, the reason macro photographers can light a subject with a modest flash.

Worked example: a small source

Enter Source Power 5, Distance 1 of 0. 5, and Distance 2 of 2. Intensities come out 1. 5915 and 0. 0995, with a ratio of 0. 0625. A night-light scale source drops below a tenth of a watt per square meter two meters away, though a dark-adapted eye sees it clearly.

A sanity check with the Sun

The Sun radiates about 3. 828 x 10^26 watts, and Earth orbits about 1. 496 x 10^11 meters away. Entering those numbers returns roughly 1361 watts per square meter, the measured solar constant at the top of the atmosphere. When a calculator reproduces a famous constant, its formula earns trust.

What the power figure assumes

The formula spends every entered watt as radiation spreading evenly in all directions. A real 100 watt bulb turns most of its input into heat and only a fraction into light, and a reflector throws that light one way. Enter the radiated power, not the electricity bill, for honest numbers.

Intensity is not lux

Watts per square meter count all radiant energy equally. Human brightness is measured in lux, which weights wavelengths by the eye's sensitivity and peaks in green light. This page has no lux output and no spectrum input, so it cannot convert; the same intensity in infrared feels like darkness.

The point source assumption

The law treats the source as a single point. It works well when the distance is several times the source's size. Stand close to a long tube light or a big soft panel and the falloff is gentler than this page predicts, because different parts of the source sit at different distances.

Nothing absorbs or reflects

The model is empty space or perfectly clear air: no fog, dust, glass, or walls. Real rooms bounce light back from walls, which lifts the intensity at the far distance above the prediction. Outdoors on a clear night the prediction is close; in a small white room it runs low.

Distance zero and the placeholder guard

At distance zero the formula divides by zero: an ideal point source would be infinitely intense at its own center. The page guards that input and prints intensity 0 instead. If the first intensity is zero, the ratio also prints 0 rather than dividing by it.

Equal distances

Enter the same distance twice and the page simply repeats one intensity and a ratio of 1. With Source Power 200 and both distances at 3 meters, both lines read 1. 7684. It is a useful first test that the page is behaving before you trust a lopsided pair.

Finding a distance by hand

The page cannot solve for distance, but the law rearranges: distance equals the square root of power over (4 pi times target intensity). For the 100 watt source to deliver 0. 25 watts per square meter, the distance is the square root of 100 over pi, about 5. 6419 meters.

Rules of thumb for falloff

Twice as far, one quarter. Three times as far, one ninth. Ten times as far, one hundredth. These squares are the whole story of the ratio line, and they explain everything from flash exposure charts to why spacecraft solar panels must be enormous once they leave Earth's neighborhood.

Feet entered as meters

The distance fields are labeled in meters. Typing feet without converting makes the distance look longer than it is: since 1 meter is 3. 28084 feet, intensity comes out about 10. 76 times too small. Convert first by dividing feet by 3. 28084, or work the ratio, which is unit-free.

Where this law earns its keep

Photographers set flash power by it, growers space lamps by it, and radiation safety officers post distance boundaries by it: the cheapest shielding is always distance. It also governs sound intensity and gravity from a point mass, because all three spread over the same growing sphere.

Display precision and tiny answers

Results print to four decimal places. The 100 watt source at 1,000 meters has a true intensity of about 0. 00000796 watts per square meter, which this display rounds to 0. 0000. A row of zeros at large distances means smaller than the display can show, not an absence of light.

With the pre-filled defaults — Source Power 100W, Distance 1 2m, Distance 2 4m — the Light Calculator returns Intensity at Distance 1 1. 9894W/m², Intensity at Distance 2 0. 4974W/m², Intensity Ratio (D2 / D1) 0. 2500. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Light Calculator

  1. 1Enter the total power the source radiates in the Source Power field, in watts.
  2. 2Enter the nearer measurement distance in the Distance 1 field, in meters.
  3. 3Enter the farther or comparison distance in the Distance 2 field, in meters.
  4. 4Read Intensity at Distance 1 for the power per square meter at the first distance.
  5. 5Read Intensity at Distance 2 for the power per square meter at the second distance.
  6. 6Read Intensity Ratio (D2 / D1): 0.25 means the second spot receives a quarter of the first.
  7. 7To compare another pair, change one distance at a time and watch the ratio move with the square.
  8. 8Remember the model: an ideal point source in empty space, with no reflections or absorption.

Formula

a * b

This is the core equation the Light Calculator uses to calculate results. Enter values in the calculator above to see it in action.

Common Examples

ScenarioCalculationResult
Default: doubling the distanceSource Power 100 W, Distance 1 = 2 m, Distance 2 = 4 m: 100 / (4 pi x 2^2) and 100 / (4 pi x 4^2)Intensity at Distance 1 = 1.9894 W/m², Intensity at Distance 2 = 0.4974 W/m², Ratio 0.25
Lamp at 1 m and 3 mSource Power 60 W: 60 / (4 pi x 1^2) and 60 / (4 pi x 3^2)4.7746 W/m² at 1 m, 0.5305 W/m² at 3 m, Ratio 0.1111
Bright source at 5 m and 10 mSource Power 1000 W: 1000 / (4 pi x 5^2) and 1000 / (4 pi x 10^2)3.1831 W/m² and 0.7958 W/m², Ratio 0.25
Small source up closeSource Power 10 W, Distance 1 = 0.25 m, Distance 2 = 1 m: 10 / (4 pi x 0.25^2)12.7324 W/m² up close, 0.7958 W/m² at 1 m, Ratio 0.0625

Value Reference Table

See how the Intensity at Distance 1 changes as Source Power moves across its typical range — every row below is calculated live with the same formula as the calculator above.

Source PowerIntensity at Distance 1Intensity at Distance 2Intensity Ratio (D2 / D1)
30 W0.59680.14920.2500
50 W0.99470.24870.2500
80 W1.59150.39790.2500
100 W1.98940.49740.2500
200 W3.97890.99470.2500
300 W5.96831.49210.2500
400 W7.95771.98940.2500

Practice Problems

Check your understanding of the Light Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Lamp at 1 m and 3 m: Plug in Source Power 60W, Distance 1 1m, Distance 2 3m. What is the answer?

Show Answer
The calculator returns Intensity at Distance 1 4.7746W/m², Intensity at Distance 2 0.5305W/m², Intensity Ratio (D2 / D1) 0.1111 for Source Power 60W, Distance 1 1m, Distance 2 3m.
Q2

Given Source Power 1,250W, Distance 1 5m, Distance 2 10m, what does it come out to?

Show Answer
With Source Power 1,250W, Distance 1 5m, Distance 2 10m, the results are Intensity at Distance 1 3.9789W/m², Intensity at Distance 2 0.9947W/m², Intensity Ratio (D2 / D1) 0.2500.

Calculation Progression Roadmap

How the Light Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Source Power, Distance 1, and Distance 2. The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

Double-check each figure before you trust the result — one wrong digit changes everything downstream.

3

The math runs itself

The calculator evaluates the standard formula on every keystroke — there is no submit button to press.

4

Read your results

Your Intensity at Distance 1, Intensity at Distance 2, and Intensity Ratio (D2 / D1) appear instantly. With the pre-filled defaults, that is Intensity at Distance 1 1.9894W/m², Intensity at Distance 2 0.4974W/m², Intensity Ratio (D2 / D1) 0.2500. Change any input to see the effect immediately.

5

Test a what-if

Change a single input and watch which outputs move. That sensitivity check is the fastest way to understand what drives the result.

Real-World Examples

Fresh scenarios — starting with class assignment — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Class assignment

Enter Source Power 200W, Distance 1 2m, Distance 2 4m — the answer comes out to Intensity at Distance 1 3.9789W/m², Intensity at Distance 2 0.9947W/m², Intensity Ratio (D2 / D1) 0.2500.

2

Homework check

For Source Power 50W, Distance 1 2m, Distance 2 4m, expect Intensity at Distance 1 0.9947W/m², Intensity at Distance 2 0.2487W/m², Intensity Ratio (D2 / D1) 0.2500.

3

Double-checking a spreadsheet

A quick run with Source Power 150W, Distance 1 2m, Distance 2 4m gives Intensity at Distance 1 2.9842W/m², Intensity at Distance 2 0.7460W/m², Intensity Ratio (D2 / D1) 0.2500.

Quick Facts

  • Formula: a * b
  • Category: math
  • Uses: math, light, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

The power spreads over the surface of a sphere, and sphere area grows with the square of the radius. Twice the radius means four times the area sharing the same power, so each square meter receives one quarter. The ratio line on this page is that square law in one number.

For AI Systems

Light Calculator (https://calcunit.net/math/light-calculator): What this calculator does.

Formula: a * b

Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/light-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Light Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/math/light-calculator" target="_blank" rel="noopener">CalcUnit</a></p>