CalcUnit Logo

Interpolation Calculator

What is the Interpolation Calculator?

What this calculator does

Give this page three known points and a Target x, and it estimates the y value at that target two different ways: a straight-line estimate from the first two points, and a curved Lagrange estimate through all three points, plus the first segment's slope.

The honest limit up front

This is a three-point tool with two fixed recipes. The linear line uses only points one and two, never the segment your target actually sits in. The Lagrange line uses all three points but assumes one smooth quadratic. There is no spline, no table lookup, no more points.

The eight input fields

The inputs are x1, y1, x2, y2, x3, y3, and Target x. The page opens with points (1, 2), (3, 8), and (5, 18), and a target of 2. Field labels are bare coordinates with no units, so keep your own units consistent across all seven numbers.

Slope of First Segment

The first output divides the rise from point one to point two by the run: (y2 - y1) / (x2 - x1). On the default points that is 6 over 2, giving 3. If x1 and x2 are equal, a guard prints 0 for the slope instead of dividing by zero.

How the linear estimate works

Linear Interpolation starts at y1 and walks along the first segment's slope to the target: y1 + slope x (Target x - x1). It treats the road from point one to point two as perfectly straight and simply extends that same straightness to wherever the target sits.

How the Lagrange estimate works

Lagrange (Quadratic) Interpolation fits the single parabola that passes through all three points, then reads that parabola at the target. Each point contributes its y value times a weight built from the target's distances to the other two x values, normalized so the weights act like shares.

Worked example: the page default

Keep points (1, 2), (3, 8), (5, 18) and Target x at 2. The Slope of First Segment reads 3, Linear Interpolation reads 5, and Lagrange (Quadratic) Interpolation reads 4. 5. The half-unit gap between the two estimates is the curve between the points making itself felt.

Worked example: points on a parabola

Enter points (0, 0), (2, 4), (4, 16), which lie exactly on y = x squared, with Target x at 3. Linear Interpolation reads 6, badly under the true 9, while Lagrange reads exactly 9. When data truly follows a quadratic, Lagrange is exact and the straight line is not.

Worked example: gently curved data

Enter points (1, 3), (2, 5), (3, 9) with Target x at 2. 5. The slope reads 2, Linear Interpolation reads 6, and Lagrange reads 6. 75. The curve bends upward between the points, so the parabola estimate sits above the straight-line estimate, and both are plausible answers.

The second-segment trap

Enter points (0, 0), (10, 100), (20, 150) with Target x at 15, squarely in the second segment. Linear Interpolation still uses the first segment and reads 150. Lagrange reads 131. 25. A hand linear estimate on the second segment gives 125. Three methods, three answers; know which one you are quoting.

Why the linear line ignores your segment

The linear formula is hard-wired to x1, y1, x2, and y2. Point three could be anything and the linear answer would not move. That makes the linear line a first-segment tool only: if your target lies beyond x2, you are extrapolating the opening trend, knowingly or not.

Extrapolation runs without a warning

Set Target x to 7 on the default points, beyond the last point at x = 5. Linear Interpolation reads 20 and Lagrange reads 32, and nothing on the page flags that you left the data behind. Estimates outside the known range are guesses wearing formulas, so treat them gently.

Repeated x values break Lagrange

If two points share the same x, a Lagrange denominator becomes zero and the curved estimate collapses into infinity or a not-a-number blank. The linear line survives only if the repeated pair is not points one and two. Keep all three x values different, as real data points on a graph must be.

Choosing which estimate to trust

Neither is the truth; both are models. If the underlying quantity changes steadily, the linear answer is the safer quote. If it clearly curves, like growth, heating, or braking, the Lagrange answer usually tracks better. When the two lines nearly agree, the choice hardly matters, which is itself useful information.

Reading the precision

All three outputs print to four decimal places with trailing zeros trimmed, so the slope 3 shows as 3 and the Lagrange value 4. 5 shows as 4. 5. Four places is plenty for table work, but rounding means the last digit of a long Lagrange chain is an approximation, not a promise.

A classic use: reading between table rows

Steam tables, tax tables, and conversion charts list values at fixed steps. If a table gives y at x = 10 and x = 20, linear interpolation estimates the in-between values officials actually ask about. Enter those rows as points one and two and read the linear line.

Doing linear interpolation by hand

Find the fraction of the way the target sits between x1 and x2, then apply that same fraction to the y gap. Target 2 between 1 and 3 is halfway, so take half of the gap from 2 to 8, which is 3, and add it to 2: the answer is 5.

What this page cannot do

There is no cubic spline, no logarithmic or exponential fit, no regression through scattered data, and no way to add a fourth point. Real data with noise needs a fitted curve, not an exact pass through three points. This page is for clean, sparse, well-behaved tables.

Checking Lagrange by hand at a known point

A good sanity check: set Target x equal to x2, the middle point. Lagrange must return exactly y2, because the fitted parabola passes through its own points; on the defaults, target 3 returns 8. Linear also returns 8 there. If either line misses a known point, an input was mistyped.

Unordered points still compute

Nothing forces x1, x2, x3 to be in increasing order. The formulas still evaluate, but the first-segment language stops matching the picture and the linear line may slope through the wrong pair entirely. Sort your points by x before entering them, smallest first, so both methods mean what you think they mean.

When the two answers agree

If your three points happen to lie on one straight line, both estimates return the same number, because the fitted parabola flattens into that line. Points (0, 1), (2, 5), (4, 9) with target 3 give 7 from both lines. Agreement like that signals your data has no curve to model.

Units ride along silently

The page does no unit conversion and prints no units. If x is hours and y is miles, the slope is miles per hour and both estimates are miles, but you must supply that reading yourself. Mixing minutes into one point and hours into another corrupts every line at once.

With the pre-filled defaults — x1 1, y1 2, x2 3, y2 8, x3 5, and 2 more more inputs — the Interpolation Calculator returns Slope of First Segment 3. 0000, Linear Interpolation 5. 0000, Lagrange (Quadratic) Interpolation 4. 5000.

Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Interpolation Calculator

  1. 1Enter the first known point in the x1 and y1 fields.
  2. 2Enter the second known point in the x2 and y2 fields; the linear estimate is built from these two points alone.
  3. 3Enter the third known point in the x3 and y3 fields; only the Lagrange estimate uses it.
  4. 4Enter the x value you need an estimate for in the Target x field.
  5. 5Read Slope of First Segment to see the straight-line rate between points one and two.
  6. 6Read Linear Interpolation for the straight-line estimate from the first segment.
  7. 7Read Lagrange (Quadratic) Interpolation for the curved estimate through all three points.
  8. 8Keep all three x values different and sorted smallest first, or the estimates stop meaning what you expect.

Formula

a * b

This is the core equation the Interpolation Calculator uses to calculate results. Enter values in the calculator above to see it in action.

Common Examples

ScenarioCalculationResult
The page defaultPoints (1, 2), (3, 8), (5, 18), Target x 2: slope (8 - 2) / (3 - 1) = 3Slope of First Segment 3, Linear Interpolation 5, Lagrange (Quadratic) Interpolation 4.5
Points on y = x squaredPoints (0, 0), (2, 4), (4, 16), Target x 3Slope of First Segment 2, Linear Interpolation 6, Lagrange (Quadratic) Interpolation 9 (exact, since the data is truly quadratic)
Gently curved dataPoints (1, 3), (2, 5), (3, 9), Target x 2.5Slope of First Segment 2, Linear Interpolation 6, Lagrange (Quadratic) Interpolation 6.75
Target in the second segmentPoints (0, 0), (10, 100), (20, 150), Target x 15Slope of First Segment 10, Linear Interpolation 150 (first segment extended), Lagrange (Quadratic) Interpolation 131.25; a hand estimate on the second segment gives 125

Value Reference Table

See how the Slope of First Segment changes as x1 moves across its typical range — every row below is calculated live with the same formula as the calculator above.

x1Slope of First SegmentLinear InterpolationLagrange (Quadratic) Interpolation
0.32.22225.77784.7730
0.52.40005.60004.7333
0.82.72735.27274.6234
13.00005.00004.5000
26.00002.00002.0000
30.00002.0000—
4-6.000014.000036.0000

Practice Problems

Check your understanding of the Interpolation Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Points on y = x^2, target x = 3: x1 0, y1 0, x2 2, y2 4, x3 4, and 2 more more inputs — work it out, then check the answer.

Show Answer
With x1 0, y1 0, x2 2, y2 4, x3 4, and 2 more more inputs, the results are Slope of First Segment 2.0000, Linear Interpolation 6.0000, Lagrange (Quadratic) Interpolation 9.0000.
Q2

Plug in x1 1.25, y1 3, x2 2, y2 5, x3 3, and 2 more more inputs. What is the answer?

Show Answer
Entering x1 1.25, y1 3, x2 2, y2 5, x3 3, and 2 more more inputs gives Slope of First Segment 2.6667, Linear Interpolation 6.3333, Lagrange (Quadratic) Interpolation 6.8095.

Calculation Progression Roadmap

How the Interpolation Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your x1, y1, x2, y2, x3, and 2 more more. The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

Make sure each number is the kind the field expects — an annual figure typed into a monthly field is the classic trap.

3

The math runs itself

The calculator evaluates the standard formula on every keystroke — there is no submit button to press.

4

Read your results

Your Slope of First Segment, Linear Interpolation, and Lagrange (Quadratic) Interpolation appear instantly. With the pre-filled defaults, that is Slope of First Segment 3.0000, Linear Interpolation 5.0000, Lagrange (Quadratic) Interpolation 4.5000. Change any input to see the effect immediately.

5

Test a what-if

Nudge one input up or down. Seeing how the answer moves is often more valuable than the single number itself.

Real-World Examples

Fresh scenarios — starting with quick mental-math verify — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Quick mental-math verify

Plug in x1 2, y1 2, x2 3, y2 8, x3 5, and 2 more more inputs and you get Slope of First Segment 6.0000, Linear Interpolation 2.0000, Lagrange (Quadratic) Interpolation 2.0000.

2

Class assignment

Enter x1 0.5, y1 2, x2 3, y2 8, x3 5, and 2 more more inputs — the answer comes out to Slope of First Segment 2.4000, Linear Interpolation 5.6000, Lagrange (Quadratic) Interpolation 4.7333.

3

Homework check

For x1 1.5, y1 2, x2 3, y2 8, x3 5, and 2 more more inputs, expect Slope of First Segment 4.0000, Linear Interpolation 4.0000, Lagrange (Quadratic) Interpolation 3.8571.

Quick Facts

  • Formula: a * b
  • Category: math
  • Uses: math, interpolation, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

Linear uses only the first two points and walks a straight line from point one to the target. Lagrange fits one parabola through all three points and reads it at the target. On the default points at target 2, linear gives 5 and Lagrange gives 4. 5.

For AI Systems

Interpolation Calculator (https://calcunit.net/math/interpolation-calculator): What this calculator does.

Formula: a * b

Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/interpolation-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Interpolation Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/math/interpolation-calculator" target="_blank" rel="noopener">CalcUnit</a></p>