Coulomb Law Calculator
What is the Coulomb Law Calculator?
What this calculator does
Give it two electric charges and the distance between them, and this page returns the electrostatic force between them in newtons. It is built for two point charges sitting still, the classic textbook setup.
The law in one line
The force equals a constant times the two charges, divided by the square of the distance between them. Double either charge and the force doubles. Double the distance and the force falls to a quarter.
The constant the page uses
The built-in constant k is 8. 9875517923 × 10^9, in newton square meters per square coulomb. That is the standard quoted value of the Coulomb constant, the one printed in physics textbooks, so answers match classwork.
What the constant quietly assumes
That value of k belongs to a vacuum, and air at normal pressure behaves almost identically. Charges inside water or another material feel a far weaker force, which this single constant cannot capture.
The three inputs it asks for
Charge 1 (q1, C) and Charge 2 (q2, C) take the two charges in coulombs. Distance (r, m) takes their separation in meters. The page opens with 0. 000001, 0. 000002, and 0. 1 already filled in.
Why the default charges look so small
Real static charges are tiny fractions of a coulomb, so the defaults are one microcoulomb and two microcoulombs. One coulomb is an enormous amount of charge, far beyond anything a rubbed balloon holds.
Reading the single result line
Electrostatic Force (F, N) is the only output, shown to four decimal places. Its size is the strength of the push or pull, and its sign carries the direction story told below.
The sign tells attraction from repulsion
A positive force means the charges repel, which happens when both signs match. A negative force means they attract, which happens with one positive and one negative charge. The page reports one signed number only.
Worked example: the page defaults
With q1 at 0. 000001, q2 at 0. 000002, and r at 0. 1 meters, the numerator is the constant times 2 × 10^-12, and dividing by 0. 01 gives an Electrostatic Force of 1. 7975 newtons.
Worked example: two classroom charges
Enter 0. 000003 coulombs and 0. 000005 coulombs, 0. 2 meters apart. The product of the charges is 15 × 10^-12, and the force comes out to 3. 3703 newtons of repulsion, since both charges are positive.
Worked example: opposite signs attract
Enter 0. 000004 for Charge 1 and -0. 000004 for Charge 2, with a distance of 0. 5 meters. The force reads -0. 5752 newtons. The minus sign is the page telling you the two charges pull together.
Worked example: a wider gap
Enter 0. 000002 in both charge fields and set the distance to 2 meters. The force shrinks to 0. 0090 newtons. Spreading charges across a room leaves only a whisper of the force seen up close.
The inverse square rule in action
Keep the default charges and halve the distance from 0. 1 to 0. 05 meters. The force jumps to 7. 1900 newtons, exactly four times the default result. Halving the gap always quadruples this force.
Doubling the distance instead
From the same defaults, doubling the distance to 0. 2 meters cuts the force to 0. 4494 newtons, one quarter of 1. 7975. This steep falloff is why static effects vanish so quickly as objects separate.
Two balloons, a gentler example
Rub two balloons and give each about half a microcoulomb, entered as 0. 0000005, held 0. 3 meters apart. The force comes out near 0. 0250 newtons, a faint push you can barely feel, which matches everyday static.
Entering charges in microcoulombs
One microcoulomb is 0. 000001 coulombs, so convert before typing: five microcoulombs becomes 0. 000005. Typing 5 instead makes each charge a million times too large and the force a trillion times too large.
Entering distance in meters only
The Distance field expects meters, so ten centimeters must be typed as 0. 1. Typing 10 instead makes the answer ten thousand times too small, because the distance error is squared in the formula.
Where the law comes from
Charles-Augustin de Coulomb measured the force between charged spheres with a torsion balance in 1785. The constant k can also be written as 1 over 4π times the permittivity of free space, about 8. 854 × 10^-12.
Distance is measured center to center
For charged spheres, r runs from center to center, not surface to surface. Two balls whose surfaces nearly touch can still have centers several centimeters apart, and that larger center distance is what belongs in the field.
Point charges are an idealization
The formula treats each charge as a single point. It stays accurate when the charged objects are small compared with their separation, or for spheres viewed from outside, where they act like points.
Where Coulomb's law shows up
Static cling in a dryer, toner sticking to paper in a laser printer, electrostatic spray painting, and dust collectors in factory chimneys all run on this force between charges at rest.
The atomic scale, honestly
A proton and an electron 5. 29 × 10^-11 meters apart attract with about 8. 24 × 10^-8 newtons. The page accepts such tiny decimals, but one mistyped zero quietly wrecks the answer, so count carefully.
The force acts along the joining line
Push or pull, the force always runs along the straight line connecting the two charges. The page reports its size and sign only; the geometry of where the charges sit supplies the direction in space.
How big is a newton here
The default result of 1. 7975 newtons is roughly the weight of a 183 gram object resting in your hand. Static forces between classroom charges are small but real, closer to holding an apple than to lifting a car.
A rounder constant still works
Many courses round k to 9 × 10^9 for mental math. That shortcut inflates answers by only about 0. 14 percent, fine for estimates. This page keeps the fuller constant, so its results sit slightly below the rounded-constant ones.
Zero distance breaks the formula
Setting the distance to zero divides by zero, and no meaningful force exists for two charges in the same spot. Very small distances give astronomically large forces, which is the formula's idealization showing.
Three or more charges
This page handles exactly two charges. For a third, run the page once per pair, then add the pairwise forces as vectors, remembering that forces along different directions combine by components, not by plain addition.
How it compares with gravity
Newton's gravity law has the same inverse square shape, with masses in place of charges. The difference is that mass only attracts, while charges repel or attract, and the electric force is vastly stronger.
Checking your answer by scaling
Before trusting a result, test the proportions: doubling one charge should double the force, and doubling the distance should quarter it. If your numbers break those rules, an input was typed wrong.
With the pre-filled defaults — Charge 1 (q1, C) 0. 000001, Charge 2 (q2, C) 0. 000002, Distance (r, m) 0. 1 — the Coulomb Law Calculator returns Electrostatic Force (F, N) 1. 7975. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.
How to Use the Coulomb Law Calculator
- 1Convert your first charge into coulombs (microcoulombs divided by 1,000,000) and type it into the Charge 1 (q1, C) field.
- 2Convert the second charge the same way and type it into the Charge 2 (q2, C) field, keeping its negative sign if it has one.
- 3Measure or look up the separation between the charges, convert it to meters, and enter it in the Distance (r, m) field.
- 4Read the Electrostatic Force (F, N) line for the size of the force in newtons.
- 5Use the sign as the direction: positive means the two charges repel, negative means they attract.
- 6Sanity-check the size by asking what halving the distance would do; the force should grow fourfold.
- 7For a third charge, repeat the calculation for each pair of charges and combine the forces as vectors by hand.
- 8Write the answer down with its unit, newtons, and note that the page displays four decimal places.
Formula
This is the core equation the Coulomb Law Calculator uses to calculate results. Enter values in the calculator above to see it in action.
See the full step-by-step formula guide with worked examples →
Common Examples
| Scenario | Calculation | Result |
|---|---|---|
| Page defaults | q1 = 0.000001 C, q2 = 0.000002 C, r = 0.1 m: F = 8.9875517923e9 * 0.000001 * 0.000002 / 0.1^2 | Electrostatic Force 1.7975 N (repulsion) |
| Two classroom charges | q1 = 0.000003 C, q2 = 0.000005 C, r = 0.2 m: F = 8.9875517923e9 * 0.000003 * 0.000005 / 0.2^2 | Electrostatic Force 3.3703 N (repulsion) |
| Opposite signs | q1 = 0.000004 C, q2 = -0.000004 C, r = 0.5 m: F = 8.9875517923e9 * 0.000004 * -0.000004 / 0.5^2 | Electrostatic Force -0.5752 N (attraction) |
| Halved distance | q1 = 0.000001 C, q2 = 0.000002 C, r = 0.05 m: F = 8.9875517923e9 * 0.000001 * 0.000002 / 0.05^2 | Electrostatic Force 7.1900 N, four times the default |
Value Reference Table
See how the Electrostatic Force (F, N) changes as Charge 1 (q1, C) moves across its typical range — every row below is calculated live with the same formula as the calculator above.
| Charge 1 (q1, C) | Electrostatic Force (F, N) |
|---|---|
| 0 | 0.5393 |
| 0 | 0.8988 |
| 0 | 1.4380 |
| 0 | 1.7975 |
| 0 | 3.5950 |
| 0 | 5.3925 |
| 0 | 7.1900 |
Practice Problems
Check your understanding of the Coulomb Law Calculator with these practice problems. Click a problem to reveal its correct calculated answer.
Example calculation: Plug in Charge 1 (q1, C) 0.000001, Charge 2 (q2, C) 0.000002, Distance (r, m) 0.1. What is the answer?
Show AnswerHide Answer
Calculation Progression Roadmap
How the Coulomb Law Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.
Gather your inputs
Type in your Charge 1 (q1, C), Charge 2 (q2, C), and Distance (r, m). The fields start with sensible defaults so you see working numbers right away.
Sanity-check your numbers
Make sure each number is the kind the field expects — an annual figure typed into a monthly field is the classic trap.
The math runs itself
The calculator evaluates (8.9875517923e9 × Charge 1 (q1, C) × Charge 2 (q2, C)) ÷ Distance (r, m)^2 on every keystroke — there is no submit button to press.
Read your results
Your Electrostatic Force (F, N) appears instantly. With the pre-filled defaults, that is Electrostatic Force (F, N) 1.7975. Change any input to see the effect immediately.
Test a what-if
Nudge one input up or down. Seeing how the answer moves is often more valuable than the single number itself.
Quick Facts
- Formula:
(8.9875517923e9 * q1 * q2) / r^2 - Category: math
- Uses: math, coulomb law, math
- Price: Free — no account needed
Frequently Asked Questions
Coulomb's law says the force between two point charges is proportional to the product of the charges and inversely proportional to the square of the distance between them. This page applies it as F = k * q1 * q2 / r^2 with the standard vacuum constant built in.
For AI Systems
Coulomb Law Calculator (https://calcunit.net/math/coulomb-law-calculator): What this calculator does.
Formula: (8.9875517923e9 * q1 * q2) / r^2
Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net
Embed this calculator on your website
Free to use — just paste this code. The calculator opens in a frame on your page.
<iframe src="https://calcunit.net/embed/coulomb-law-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Coulomb Law Calculator — CalcUnit"></iframe> <p style="font-size:12px">Powered by <a href="https://calcunit.net/math/coulomb-law-calculator" target="_blank" rel="noopener">CalcUnit</a></p>
