Arithmetic Sequence Calculator
What is the Arithmetic Sequence Calculator?
What this calculator does
An arithmetic sequence is a list of numbers built by adding the same amount at every step. Give this page the First Term (a1), the Common Difference (d), and the Number of Terms (n), and it returns the Nth Term (an) and the Sum of N Terms (Sn), plus a chart showing how the terms grow.
The three inputs it asks for
First Term (a1) is the opening value. Common Difference (d) is the fixed step added to get each next term, and it can be negative or decimal. Number of Terms (n) sets how far the list runs; it counts whole positions starting at 1. The page opens with 1, 2, and 10 filled in.
Reading the two result lines
Nth Term (an) is the single value at position n. Sum of N Terms (Sn) is the total of every term from position 1 through position n added together. Both results are shown to four decimal places. One line is a destination; the other is the whole journey's cost.
Worked example: the page default
With First Term (a1) 1, Common Difference (d) 2, and Number of Terms (n) 10, the list is the odd numbers 1, 3, 5, up to 19. The page reports Nth Term (an) 19. 0000 and Sum of N Terms (Sn) 100. 0000. The first ten odd numbers total exactly 100.
Why odd numbers sum to a square
The default hides a pretty pattern: the first n odd numbers always sum to n squared. Ten odd numbers give 10 times 10, which is 100, matching the Sum of N Terms line. Each new odd number wraps the previous square in an L-shaped border of exactly the right size.
How the nth term formula works
The nth term equals a1 plus (n minus 1) times d. Position 1 needs no step at all, since the first term is given, so d is added one fewer time than the position number suggests. For the default, 1 plus 9 times 2 gives 19, the tenth odd number.
How the sum formula works
The sum equals (n over 2) times (2 times a1 plus (n minus 1) times d). A friendlier twin form says the sum is n times the average of the first and last terms. For the default that is 10 times (1 plus 19) over 2, which is 100, the same answer both ways.
Worked example: counting to one hundred
Enter First Term (a1) 1, Common Difference (d) 1, and Number of Terms (n) 100. The page reports Nth Term (an) 100. 0000 and Sum of N Terms (Sn) 5050. 0000. Adding every whole number from 1 to 100 gives 5050, the answer schoolchildren meet in the famous Gauss pairing story.
Worked example: steps of seven
Enter First Term (a1) 4, Common Difference (d) 7, and Number of Terms (n) 20. The page reports Nth Term (an) 137. 0000 and Sum of N Terms (Sn) 1410. 0000. The sum checks by the twin form: 20 times (4 plus 137) over 2 is 20 times 70. 5, which is 1410.
Worked example: counting down
Enter First Term (a1) 50, Common Difference (d) -3, and Number of Terms (n) 15, like points draining away in equal amounts. The page reports Nth Term (an) 8. 0000 and Sum of N Terms (Sn) 435. 0000. Even while terms fall, the total keeps growing as long as the terms themselves stay positive.
Worked example: decimal steps
Enter First Term (a1) 2. 5, Common Difference (d) 1. 5, and Number of Terms (n) 12. The page reports Nth Term (an) 19. 0000 and Sum of N Terms (Sn) 129. 0000. Nothing in the formulas requires whole numbers, so halves, quarters, and longer decimals all flow through the same two lines.
The chart under the results
Below the numbers, a chart titled Term Value vs Position n plots the term value for positions 1 through 25. Because every step adds the same amount, the points always form a straight line. With a first term of 6 and a difference of 6, the line reaches 150. 0000 at position 25.
A steep line means a big difference
The chart's slope is the common difference made visible. A difference of 2 climbs gently; a difference of 20 rockets upward; a negative difference tilts the line downward toward zero and beyond. Reading the tilt is a quick sanity check that the difference was entered with the right size and sign.
n counts positions, so it stays whole
The Number of Terms (n) field steps by 1 and starts at a minimum of 1, because a position is a count, not a measurement. There is no term 4. 5 in a sequence. The other two inputs face no such limit and accept any decimal values your problem needs.
Where sequences show up in real life
A savings balance topped up by the same deposit each month, before interest, follows an arithmetic sequence. So do stacked rows of pipes or seats that grow by a fixed count per row, simple interest that adds the same amount yearly, and training plans adding equal weekly distance.
Common mistake: adding d one time too many
Position 10 is reached from position 1 in nine steps, not ten. Multiplying the difference by the full n overshoots: for the default it would give 21 instead of the true tenth term, 19. When unsure, test position 1 and position 2 by hand; the gap between them must equal d exactly.
Common mistake: confusing the term with the sum
Nth Term (an) answers what is the value at this position, while Sum of N Terms (Sn) answers what do all the values so far add to. Homework and budget questions usually want one specific line. Reading the wrong one is the most common way these pages produce answers that feel off.
Its overlap with the Arithmetic Progression page
This site also offers an Arithmetic Progression Calculator, and the overlap is nearly total: the nth term and sum formulas are identical, and both pages return the same pair of answers. That page adds Previous Term and Mean lines at two decimal places. This page keeps four decimals and adds the position chart.
What this calculator leaves out
There is no Previous Term or Mean result here, no listing of the individual terms, and no way to work backwards from a term's value to its position. Geometric sequences, where terms multiply instead of add, are outside its scope entirely. The position question is easy by hand, as the questions below show.
A thirty-second check of any answer
Divide Sum of N Terms (Sn) by n to get the average term, which must equal the average of the first and nth terms. For the steps-of-seven example, 1410 over 20 is 70. 5, and (4 plus 137) over 2 is 70. 5. If those two disagree, recheck the inputs.
With the pre-filled defaults — First Term (a1) 1, Common Difference (d) 2, Number of Terms (n) 10 — the Arithmetic Sequence Calculator returns Nth Term (an) 19. 0000, Sum of N Terms (Sn) 100. 0000. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.
How to Use the Arithmetic Sequence Calculator
- 1Enter the opening value of the sequence in the First Term (a1) field.
- 2Enter the fixed step between terms in the Common Difference (d) field, negative if the sequence decreases.
- 3Enter how far to run the sequence in the Number of Terms (n) field; it counts whole positions starting at 1.
- 4Read the Nth Term (an) line: it is the value at position n, shown to four decimal places.
- 5Read the Sum of N Terms (Sn) line: it is the total of all terms from position 1 through position n.
- 6Look at the Term Value vs Position n chart to see the terms for positions 1 through 25 as a straight line.
- 7Use the line's tilt as a check: it climbs when d is positive, stays flat when d is 0, and falls when d is negative.
- 8Verify by dividing Sn by n; the result should equal the average of the first term and the nth term.
Formula
This is the core equation the Arithmetic Sequence Calculator uses to calculate results. Enter values in the calculator above to see it in action.
See the full step-by-step formula guide with worked examples →
Common Examples
| Scenario | Calculation | Result |
|---|---|---|
| Page default: odd numbers | First Term (a1) 1, Common Difference (d) 2, Number of Terms (n) 10: an 1 + 9 * 2, Sn (10 / 2) * (2 + 18) | Nth Term (an) 19.0000, Sum of N Terms (Sn) 100.0000 |
| Counting to one hundred | First Term (a1) 1, Common Difference (d) 1, Number of Terms (n) 100: an 1 + 99 * 1, Sn (100 / 2) * (2 + 99) | Nth Term (an) 100.0000, Sum of N Terms (Sn) 5050.0000 |
| Steps of seven | First Term (a1) 4, Common Difference (d) 7, Number of Terms (n) 20: an 4 + 19 * 7, Sn (20 / 2) * (8 + 133) | Nth Term (an) 137.0000, Sum of N Terms (Sn) 1410.0000 |
| Counting down | First Term (a1) 50, Common Difference (d) -3, Number of Terms (n) 15: an 50 + 14 * -3, Sn (15 / 2) * (100 - 42) | Nth Term (an) 8.0000, Sum of N Terms (Sn) 435.0000 |
Value Reference Table
See how the Nth Term (an) changes as First Term (a1) moves across its typical range — every row below is calculated live with the same formula as the calculator above.
| First Term (a1) | Nth Term (an) | Sum of N Terms (Sn) |
|---|---|---|
| 0.3 | 18.3000 | 93.0000 |
| 0.5 | 18.5000 | 95.0000 |
| 0.8 | 18.8000 | 98.0000 |
| 1 | 19.0000 | 100.0000 |
| 2 | 20.0000 | 110.0000 |
| 3 | 21.0000 | 120.0000 |
| 4 | 22.0000 | 130.0000 |
Practice Problems
Check your understanding of the Arithmetic Sequence Calculator with these practice problems. Click a problem to reveal its correct calculated answer.
Odd numbers (1, 3, 5...) up to 10th term: Given First Term (a1) 1, Common Difference (d) 2, Number of Terms (n) 10, what does it come out to?
Show AnswerHide Answer
You enter First Term (a1) 1.25, Common Difference (d) 1, Number of Terms (n) 100 — what does the calculator return?
Show AnswerHide Answer
Calculation Progression Roadmap
How the Arithmetic Sequence Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.
Gather your inputs
Type in your First Term (a1), Common Difference (d), and Number of Terms (n). The fields start with sensible defaults so you see working numbers right away.
Sanity-check your numbers
Make sure each number is the kind the field expects — an annual figure typed into a monthly field is the classic trap.
The math runs itself
The calculator evaluates First Term (a1) + (Number of Terms (n) - 1) × Common Difference (d) on every keystroke — there is no submit button to press.
Read your results
Your Nth Term (an) and Sum of N Terms (Sn) appear instantly. With the pre-filled defaults, that is Nth Term (an) 19.0000, Sum of N Terms (Sn) 100.0000. Change any input to see the effect immediately.
Test a what-if
Nudge one input up or down. Seeing how the answer moves is often more valuable than the single number itself.
Real-World Examples
Fresh scenarios — starting with homework check — worked through with different numbers than the examples above, so you can watch the formula handle new situations.
Homework check
For First Term (a1) 2, Common Difference (d) 2, Number of Terms (n) 10, expect Nth Term (an) 20.0000, Sum of N Terms (Sn) 110.0000.
Double-checking a spreadsheet
A quick run with First Term (a1) 0.5, Common Difference (d) 2, Number of Terms (n) 10 gives Nth Term (an) 18.5000, Sum of N Terms (Sn) 95.0000.
Settling a debate
With First Term (a1) 1.5, Common Difference (d) 2, Number of Terms (n) 10, the calculator returns Nth Term (an) 19.5000, Sum of N Terms (Sn) 105.0000.
Quick Facts
- Formula:
aₙ = a₁ + (n-1)d - Category: math
- Uses: arithmetic sequence, series, math
- Price: Free — no account needed
Frequently Asked Questions
It is an ordered list of numbers where consecutive terms always differ by the same fixed amount, the common difference. The odd numbers 1, 3, 5, 7 form one with difference 2. Because the step never changes, any term and any running total can be computed directly from the first term, the difference, and the position.
For AI Systems
Arithmetic Sequence Calculator (https://calcunit.net/math/arithmetic-sequence): What this calculator does.
Formula: aₙ = a₁ + (n-1)d
Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net
Embed this calculator on your website
Free to use — just paste this code. The calculator opens in a frame on your page.
<iframe src="https://calcunit.net/embed/arithmetic-sequence/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Arithmetic Sequence Calculator — CalcUnit"></iframe> <p style="font-size:12px">Powered by <a href="https://calcunit.net/math/arithmetic-sequence" target="_blank" rel="noopener">CalcUnit</a></p>
