CalcUnit Logo

How to Calculate Permeability

Calculates the permeability of a porous medium using Darcy's Law.

The Formula

(flow * viscosity * length) / (area * dp)

The permeability formula uses the mathematical relationship: (flow * viscosity * length) / (area * dp). Each variable in the formula represents a measurable quantity that affects the final result.

What Each Variable Means

Every value in the permeability formula, what it measures, and the value used in the worked example on this page:

VariableTypeExample value
Flow Rate (q, m³/s)Input (you provide)0
Fluid Viscosity (μ, Pa·s)Input (you provide)0.001
Length of Medium (L, m)Input (you provide)0.1
Cross-sectional Area (A, m²)Input (you provide)0.01
Pressure Difference (ΔP, Pa)Input (you provide)100,000
Permeability (k, m²)Result (calculated)—

Step-by-Step Method

  1. 1Write down the values you know: Flow Rate (q, m³/s), Fluid Viscosity (μ, Pa·s), Length of Medium (L, m), Cross-sectional Area (A, m²), Pressure Difference (ΔP, Pa).
  2. 2Substitute your known values into the formula: (flow * viscosity * length) / (area * dp).
  3. 3Work through the arithmetic in the standard order of operations — parentheses first, then exponents, then multiplication and division, then addition and subtraction.
  4. 4Check that your result carries the correct unit and falls in a reasonable range for the problem.
  5. 5Verify your answer with the interactive Permeability Calculator — it solves the same formula instantly.

Worked Example

Take a concrete case: flow rate (q, m³/s) = 0, with the other inputs at the typical values from the variables table above. Substituting into the formula gives permeability (k, m²) = 0.0000000000050000. These numbers are solved by the same engine that powers the Permeability calculator, so you can reproduce them exactly by entering the same inputs there.

Flow Rate (q, m³/s)Permeability (k, m²)
00.0000000000030000
00.0000000000050000
00.0000000000080000
00.0000000000100000
00.0000000000200000
00.0000000000300000
00.0000000000400000

How each result changes as flow rate (q, m³/s) changes, holding the other inputs constant.

Practice Problems

1. Example calculation: Flow Rate (q, m³/s) 0.0001, Fluid Viscosity (μ, Pa·s) 0.001, Length of Medium (L, m) 0.1, Cross-sectional Area (A, m²) 0.01, Pressure Difference (ΔP, Pa) 100,000 — work it out, then check the answer.

Answer: With Flow Rate (q, m³/s) 0.0001, Fluid Viscosity (μ, Pa·s) 0.001, Length of Medium (L, m) 0.1, Cross-sectional Area (A, m²) 0.01, Pressure Difference (ΔP, Pa) 100,000, the results are Permeability (k, m²) 0.0000000000100000.

Frequently Asked Questions

What is the formula for permeability?

The formula is: (flow * viscosity * length) / (area * dp). Calculates the permeability of a porous medium using Darcy's Law.

What values do I need to calculate permeability?

You need flow rate (q, m³/s), fluid viscosity (μ, pa·s), length of medium (l, m), cross-sectional area (a, m²), pressure difference (δp, pa). The calculator produces permeability (k, m²) from those inputs.

What is the permeability when flow rate (q, m³/s) is 0?

With flow rate (q, m³/s) = 0, the result is permeability (k, m²) = 0.0000000000050000. This is worked through in full in the example on this page.

Related Topics

physicspermeabilitymath

Use the Interactive Calculator

Skip the manual math — get instant results with our free Permeability calculator.

Open Calculator

Related Calculators