CalcUnit Logo

How to Calculate Fracture Toughness

Calculates the fracture toughness (K_Ic) of a material containing a crack under load stress.

The Formula

geo_factor * stress * sqrt(PI * (crack_length / 1000))

The fracture toughness formula uses the mathematical relationship: geo_factor * stress * sqrt(PI * (crack_length / 1000)). Each variable in the formula represents a measurable quantity that affects the final result.

What Each Variable Means

Every value in the fracture toughness formula, what it measures, and the value used in the worked example on this page:

VariableTypeExample value
Applied Stress (σ, MPa)Input (you provide)150
Crack Length (a, mm)Input (you provide)2
Geometry Factor (Y)Input (you provide)1.12
Fracture Toughness (K_Ic, MPa·m^0.5)Result (calculated)—

Step-by-Step Method

  1. 1Write down the values you know: Applied Stress (σ, MPa), Crack Length (a, mm), Geometry Factor (Y).
  2. 2Substitute your known values into the formula: geo_factor * stress * sqrt(PI * (crack_length / 1000)).
  3. 3Work through the arithmetic in the standard order of operations — parentheses first, then exponents, then multiplication and division, then addition and subtraction.
  4. 4Check that your result carries the correct unit and falls in a reasonable range for the problem.
  5. 5Verify your answer with the interactive Fracture Toughness Calculator — it solves the same formula instantly.

Worked Example

Take a concrete case: applied stress (σ, mpa) = 80, with the other inputs at the typical values from the variables table above. Substituting into the formula gives fracture toughness (k_ic, mpa·m^0.5) = 7.1023. These numbers are solved by the same engine that powers the Fracture Toughness calculator, so you can reproduce them exactly by entering the same inputs there.

Applied Stress (σ, MPa)Fracture Toughness (K_Ic, MPa·m^0.5)
403.5511
807.1023
1008.8779
20017.7557
30026.6336
40035.5114
50044.3893
60053.2671

How each result changes as applied stress (σ, mpa) changes, holding the other inputs constant.

Practice Problems

1. Example calculation: Plug in Applied Stress (σ, MPa) 150, Crack Length (a, mm) 2, Geometry Factor (Y) 1.12. What is the answer?

Answer: The calculator returns Fracture Toughness (K_Ic, MPa·m^0.5) 13.3168 for Applied Stress (σ, MPa) 150, Crack Length (a, mm) 2, Geometry Factor (Y) 1.12.

Frequently Asked Questions

What is the formula for fracture toughness?

The formula is: geo_factor * stress * sqrt(PI * (crack_length / 1000)). Calculates the fracture toughness (K_Ic) of a material containing a crack under load stress.

What values do I need to calculate fracture toughness?

You need applied stress (σ, mpa), crack length (a, mm), geometry factor (y). The calculator produces fracture toughness (k_ic, mpa·m^0.5) from those inputs.

What is the fracture toughness when applied stress (σ, mpa) is 80?

With applied stress (σ, mpa) = 80, the result is fracture toughness (k_ic, mpa·m^0.5) = 7.1023. This is worked through in full in the example on this page.

Related Topics

physicsfracture toughnessmath

Use the Interactive Calculator

Skip the manual math — get instant results with our free Fracture Toughness calculator.

Open Calculator

Related Calculators