CalcUnit Logo

Descriptive Statistics Calculator

Summarize any dataset with the sum, mean, median, mode, range and standard deviation — instantly.

Descriptive Statistics

Enter up to five values. Results update as you type.

Mean
20
Median
20
Mode
—
Mode Frequency
1
Sum
100
Range
20
Minimum
—
Maximum
—
Std Dev (Sample)
7.9057

What is the Descriptive Statistics Calculator?

What this calculator does

Enter five numbers and this page summarizes them with a Sum, a Mean, a Median, a Mode, a Minimum, a Maximum, a Range, and a sample Variance and Standard Deviation. Descriptive statistics describes a dataset rather than drawing conclusions beyond it, and this page covers its simplest toolkit.

Its sibling is the same tool

This page and the Basic Statistics Calculator are the same instrument: identical five input slots, defaults, formulas, and outputs, now including the same Median, Mode, and Mode Frequency lines. Only the names and short descriptions differ. Enter the same five numbers in either page and every result matches to the last decimal.

The five inputs and ten outputs

The slots are Value 1 through Value 5, opening at 10, 20, 15, 30, and 25. The outputs are Sum, Mean, Median, Mode, Mode Frequency, Minimum, Maximum, Range, Variance (Sample), and Std Dev (Sample), shown as tiles under the form. Nothing else hides anywhere: no charts, no quartiles, and no percentiles.

How each statistic is computed

Sum adds the five values and Mean divides that sum by 5. The page sorts for the Median and counts repeats for the Mode. Range is Maximum minus Minimum. Variance squares each distance from the mean, totals the squares, and divides by 4. Standard deviation is the square root of the variance.

Worked example: the shared defaults

Both pages open on 10, 20, 15, 30, and 25, and both report Sum 100, Mean 20, Median 20, Minimum 10, Maximum 30, and Range 20, with no mode, since nothing repeats. The squared distances add to 250, so Variance (Sample) is 62. 5 and Std Dev (Sample) is 7. 9057.

Worked example: an even ladder

Enter 12, 18, 24, 30, and 36. The page reports Sum 120, Mean 24, Median 24, Minimum 12, Maximum 36, and Range 24, again with no mode. The squared distances from 24 add to 360, so Variance (Sample) reads 90 and Std Dev (Sample) reads 9. 4868.

Worked example: decimal data

Enter 2. 5, 3. 5, 4. 5, 5. 5, and 6. 5. The page reports Sum 22. 5, Mean 4. 5, Median 4. 5, Minimum 2. 5, Maximum 6. 5, and Range 4. Variance (Sample) reads 2. 5, Std Dev (Sample) 1. 5811. Decimals need no conversion; every formula treats them like whole numbers.

Worked example: one outlier bends everything

Enter 5, 7, 6, 8, and 44. It reports Sum 70, Mean 14, Median 7, Maximum 44, and Range 39, with Variance (Sample) 282. 5 and Std Dev (Sample) 16. 8077. One stray value drags the mean to 14, a figure no entry sits near; the median holds at 7.

Worked example: values in the hundreds

Enter 100, 200, 300, 400, and 500. The page reports Sum 1,500, Mean 300, Median 300, Minimum 100, Maximum 500, and Range 400. Variance (Sample) reads 25,000 and Std Dev (Sample) reads 158. 1139. Scaling every value by ten scales the standard deviation tenfold and the variance a hundredfold.

The center trio, complete

Descriptive statistics centers on the trio of mean, median, and mode, and this page prints all three. The outlier set shows why the trio matters: its mean is 14, pulled by the single 44, while its median is 7, the middle of the four ordinary values. Neither center alone tells the whole story.

Reading the Mode Frequency line

The Mode Frequency counts how often the Mode value appears. A frequency of 1 means every value appears once: the set has no mode, and the Mode tile shows a dash. When two values tie for the highest count, the page reports the one you entered first, so name both in your own report.

Sample variance and Bessel's correction

The divisor of 4 is the count minus one, a correction named for Friedrich Bessel, compensating for spread around a mean estimated from the same data. It marks the outputs as sample statistics. When your five values are everything, the population variance divides by 5 instead, and equals the printed sample variance times four fifths.

Exactly five values, always

The slot count is fixed, the defaults are pre-filled, and any slot you leave untouched contributes its starter number to every output. There is no paste-a-list box and no variable count. Treat the page as a five-value instrument: small classroom sets, five game scores, five daily readings, five repeated measurements.

Which sibling page should you use

Either, because they are identical. Pick the name matching your assignment or search, take the same care with the defaults, and expect the same results. Neither page gives you quartiles or room for a sixth value; those needs send you to the hand methods here or a spreadsheet.

Descriptive is not inferential

Everything on this page describes only the five numbers you typed. It runs no hypothesis test, builds no confidence interval, and licenses no claim about any larger group the numbers came from. That boundary is the honest core of the subject's name: description first, and any inference is separate work with separate tools.

Why the two centers part company

The mean listens to every value by size, while the median listens only to position. Symmetric data keeps them together, as the ladder showed with both at 24. Skewed data pulls them apart, as the outlier set showed with 14 against 7. Reporting both is how you confess a dataset's shape in two numbers.

The standard deviation in plain terms

Read it as the typical miss distance between a value and the mean. On the decimal set the typical miss is about 1. 5811, small change around 4. 5. On the outlier set it balloons to 16. 8077, the page's way of admitting the values huddle nowhere. Same statistic, two opposite stories, both honest.

Zeros and negatives need no ceremony

Nothing in these formulas fears a zero or a minus sign: distances are squared, sums are signed, and the minimum goes negative. A week of temperature anomalies, profit and loss figures, or height differences above and below a benchmark all summarize cleanly. Only empty slots are a problem, only because they smuggle in defaults.

Five values is a teaching size

Textbooks start descriptive statistics at counts you can hold in one glance because every step stays visible: the middle value is a fact, not a search. This page keeps that virtue and limit. Once the method is understood at five, the same definitions scale to five thousand unchanged, the real lesson the page teaches.

A summary by hand, for any count

Add the values and divide by the count for the mean. Sort for the median, count repeats for the mode, and take the extremes for the range. Square distances from the mean, total the squares, and divide by the count, or one less for a sample, and root it for standard deviation.

One rising value moves the mean, not the median

Start with 20, 22, 24, 26, and 28: the mean is 24, the median is 24, and the standard deviation is 3. 1623. Raise the last score to 38: the mean climbs to 26, the standard deviation to 7. 0711, while the median stays 24. Raise it to 48 and the mean reaches 28 with a standard deviation of 11.

4018. Raise it to 68 and the mean is 32 with a standard deviation of 20. 2485, median still 24.

Five quiz scores with a real mode

Enter 14, 18, 18, 22, and 26. The sum is 98, the mean is 19. 6, the median is 18, and the mode is 18 with a mode frequency of 2. The minimum is 14, the maximum is 26, and the range is 12. The squared distances from the mean add to 83. 2, so the sample variance is 20.

8 and the standard deviation is 4. 5607, a tight set with one repeated score at its heart.

Negative values summarize without fuss

Enter negative 3, negative 1, 0, 2, and 7. The sum is 5, the mean is 1, the median is 0, and there is no mode, since nothing repeats. The minimum is negative 3, the maximum is 7, and the range is 10.

The squared distances from the mean are 16, 4, 1, 1, and 36, adding to 58, so the sample variance is 14. 5 and the standard deviation is 3. 8079.

Which center should you quote

When the data are symmetric, the mean, median, and mode agree, and any of them describes the typical value. When the data are skewed, the mean follows the long tail while the median stays with the bulk, so report the median as typical and the mean beside it to show the pull.

Use the mode when the question is what value shows up most, which is also the only center that works for categories like favorite colors or shirt sizes.

The same range can hide different spreads

Take 10, 20, 30, 40, and 50 against 10, 29, 30, 31, and 50. Both sets sum to 150 with a mean of 30, a median of 30, and a range of 40. Yet the first set has a standard deviation of 15. 8114 and the second only 14. 1598: the second clusters near 30 while the first spreads evenly.

The range sees only the two extremes, so it cannot tell a clump from a ladder.

Where to go next

Dig into the spread itself with the standard-deviation-calculator and the variance-calculator, which explain the two numbers this page prints. Find the center of any list with the mean-median-mode-calculator, or get a plain average with the average-calculator when you need no other summary.

With the pre-filled defaults — Value 1 10, Value 2 20, Value 3 15, Value 4 30, Value 5 25 — the Descriptive Statistics Calculator returns Sum 100. 0000, Mean 20. 0000, Minimum 10. 0000, Maximum 30. 0000, Range 20. 0000, and 4 more more results.

Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Descriptive Statistics Calculator

  1. 1Replace Value 1 through Value 5 with your five numbers, overwriting every pre-filled default.
  2. 2Check the Sum output against your own addition to catch any leftover default before trusting the rest.
  3. 3Read the Mean tile, the sum divided by 5, as the average of your five values.
  4. 4Read the Median tile for the middle value of the sorted set, and the Mode and Mode Frequency tiles for the most frequent value and its count.
  5. 5Read Minimum, Maximum, and Range for the endpoints and the total span of the dataset.
  6. 6Read Variance (Sample) and Std Dev (Sample) for the spread, remembering the variance divides by 4 because it describes a sample.
  7. 7If the Mode Frequency reads 1, report that the set has no mode; the Mode tile shows a dash.
  8. 8If your five values are an entire population, multiply the printed variance by four fifths to get the population variance.

Formula

x1+x2+x3+x4+x5

This is the core equation the Descriptive Statistics Calculator uses to calculate results. Enter values in the calculator above to see it in action.

See the full step-by-step formula guide with worked examples →

Common Examples

ScenarioCalculationResult
An even ladder of five values12, 18, 24, 30, 36: sum 120, mean 24, sorted middle value 24, no repeats, squared distances from 24 add to 360, and 360 / 4 = 90Sum 120, Mean 24, Median 24, no Mode (Mode Frequency 1), Minimum 12, Maximum 36, Range 24, Variance 90, Std Dev 9.4868
Decimal measurements2.5, 3.5, 4.5, 5.5, 6.5: sum 22.5, mean 4.5, sorted middle value 4.5, no repeats, squared distances from 4.5 add to 10, and 10 / 4 = 2.5Sum 22.5, Mean 4.5, Median 4.5, no Mode (Mode Frequency 1), Minimum 2.5, Maximum 6.5, Range 4, Variance 2.5, Std Dev 1.5811
One outlier among ordinary values5, 7, 6, 8, 44: sum 70, mean 14, sorted middle value 7, no repeats, squared distances from 14 add to 1,130, and 1,130 / 4 = 282.5Sum 70, Mean 14, Median 7, no Mode (Mode Frequency 1), Minimum 5, Maximum 44, Range 39, Variance 282.5, Std Dev 16.8077
Values in the hundreds100, 200, 300, 400, 500: sum 1,500, mean 300, sorted middle value 300, no repeats, squared distances from 300 add to 100,000, and 100,000 / 4 = 25,000Sum 1500, Mean 300, Median 300, no Mode (Mode Frequency 1), Minimum 100, Maximum 500, Range 400, Variance 25000, Std Dev 158.1139

Value Reference Table

See how the Sum changes as Value 1 moves across its typical range — every row below is calculated live with the same formula as the calculator above.

Value 1SumMeanMinimumMaximumRangeVariance (Sample)Std Dev (Sample)MedianModeMode Frequency
393.000018.60003.000030.000027.0000107.300010.358620.0000—1
595.000019.00005.000030.000025.000092.50009.617720.0000—1
898.000019.60008.000030.000022.000073.30008.561520.0000—1
10100.000020.000010.000030.000020.000062.50007.905720.0000—1
20110.000022.000015.000030.000015.000032.50005.700920.000020.00002
30120.000024.000015.000030.000015.000042.50006.519225.000030.00002
40130.000026.000015.000040.000025.000092.50009.617725.0000—1

Practice Problems

Check your understanding of the Descriptive Statistics Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Example calculation: Plug in Value 1 10, Value 2 20, Value 3 15, Value 4 30, Value 5 25. What is the answer?

Show Answer
With Value 1 10, Value 2 20, Value 3 15, Value 4 30, Value 5 25, the results are Sum 100.0000, Mean 20.0000, Minimum 10.0000, Maximum 30.0000, Range 20.0000, and 4 more more results.

Calculation Progression Roadmap

How the Descriptive Statistics Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Value 1, Value 2, Value 3, Value 4, and Value 5. The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

Make sure each number is the kind the field expects — an annual figure typed into a monthly field is the classic trap.

3

The math runs itself

The calculator evaluates Value 1+Value 2+Value 3+Value 4+Value 5 on every keystroke — there is no submit button to press.

4

Read your results

Your Sum, Mean, Minimum, Maximum, Range, and 5 more more appear instantly. With the pre-filled defaults, that is Sum 100.0000, Mean 20.0000, Minimum 10.0000, Maximum 30.0000, Range 20.0000, and 4 more more results. Change any input to see the effect immediately.

5

Test a what-if

Nudge one input up or down. Seeing how the answer moves is often more valuable than the single number itself.

Real-World Examples

Fresh scenarios — starting with class project — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Class project

Enter Value 1 20, Value 2 20, Value 3 15, Value 4 30, Value 5 25 — the answer comes out to Sum 110.0000, Mean 22.0000, Minimum 15.0000, Maximum 30.0000, Range 15.0000, and 5 more more results.

2

Summarizing survey data

For Value 1 5, Value 2 20, Value 3 15, Value 4 30, Value 5 25, expect Sum 95.0000, Mean 19.0000, Minimum 5.0000, Maximum 30.0000, Range 25.0000, and 4 more more results.

3

Checking an assignment

A quick run with Value 1 15, Value 2 20, Value 3 15, Value 4 30, Value 5 25 gives Sum 105.0000, Mean 21.0000, Minimum 15.0000, Maximum 30.0000, Range 15.0000, and 5 more more results.

Quick Facts

  • Formula: x1+x2+x3+x4+x5
  • Category: statistics
  • Uses: statistics, descriptive statistics, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

In no functional way at all. Both pages were compared field by field: the same five input slots, the same defaults of 10, 20, 15, 30, and 25, the same ten outputs, and the same formulas, including the sample variance divisor of 4 and the median and mode lines. Only the page names and short descriptions differ.

Identical inputs return identical results on both.

For AI Systems

Descriptive Statistics Calculator (https://calcunit.net/statistics/descriptive-statistics-calculator): What this calculator does.

Formula: x1+x2+x3+x4+x5

Category: statistics · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/descriptive-statistics-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Descriptive Statistics Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/statistics/descriptive-statistics-calculator" target="_blank" rel="noopener">CalcUnit</a></p>