Inhg Converter
What is the Inhg Converter?
What this converter does.
Type a pressure into the Inches of Mercury (inHg) field and this page returns the same pressure in Pascals (Pa), PSI (psi), Bar, and mmHg (Torr). Inches of mercury is the unit American weather reports, aviation altimeters, and vacuum gauges still speak, so this page translates it into the units everyone else uses.
Where inches of mercury comes from.
The unit is literal: it is the pressure that supports a column of mercury one inch high in a glass tube. Torricelli built the first mercury barometer in 1643, and the design barely changed for three centuries. When forecasters say the barometer reads 29. 92, they mean the air is holding up 29. 92 inches of mercury.
Reading the pascals line.
The Pascals line multiplies your entry by 3386.38867
Standard sea-level pressure, 29. 92 inHg, becomes 101,320. 75 pascals. The pascal is the SI unit of pressure, one newton per square meter, maintained in the unit system NIST oversees. Scientific papers, international weather models, and engineering datasheets all default to pascals or their larger cousin, the kilopascal.
Reading the PSI line.
The PSI line multiplies by 0.491154, so 29.92 inHg becomes 14.6953 psi
That figure should look familiar: standard atmospheric pressure is 14. 7 pounds per square inch, the load every square inch of your body carries at sea level. PSI is the unit on American tire gauges and shop compressors, which makes this line the bridge between weather and hardware.
Reading the bar line.
The Bar line multiplies by 0.03386389, giving 1.013208 bar for standard pressure
The bar is a metric convenience unit, defined as exactly 100,000 pascals, and it dominates European gauges, espresso machines, and dive equipment. Weather services outside the United States often report millibars, also called hectopascals, where standard pressure reads 1,013. 25.
Reading the mmHg line.
The mmHg (Torr) line multiplies by exactly 25. 4, because one inch is exactly 25. 4 millimeters. Standard pressure becomes 759. 97 mmHg. Millimeters of mercury survive in medicine, where blood pressure is written as 120 over 80 mmHg, and in laboratory vacuum work, where the torr is the working unit for pumps and chambers.
Worked example one: standard sea-level pressure.
Enter 29.92, the value this page loads with
The outputs read 101,320. 75 pascals, 14. 6953 psi, 1. 013208 bar, and 759. 97 mmHg. The exact defined standard atmosphere is 101,325 pascals, a hair higher, because 29. 92 is itself a rounded figure; the true equivalent is 29. 9213 inHg, a difference no home barometer can show.
Worked example two: a stormy low.
Enter 28. 50, the kind of reading a strong storm system drags across a weather map. The outputs read 96,512. 08 pascals, 13. 9979 psi, 0. 965121 bar, and 723. 90 mmHg. Hurricane central pressures push lower still, toward 27 inches and below, which is part of why forecasters watch the inHg trend as much as the value itself.
Worked example three: a strong high.
Enter 30.50, a crisp fair-weather high parked over the Midwest
The outputs read 103,284. 85 pascals, 14. 9802 psi, 1. 032849 bar, and 774. 70 mmHg. High readings mean dense, sinking air, which suppresses clouds. Pilots care as much as farmers: an altimeter set to yesterday's pressure can misread altitude by hundreds of feet today.
Aviation runs on this unit.
American pilots set their altimeters to the local pressure in inches of mercury, read out in every ATIS broadcast as, for example, altimeter two niner niner two. Above 18,000 feet everyone switches to the standard 29. 92 setting so all aircraft share one reference, which is the entire basis of the flight level system.
Vacuum work runs on it too.
HVAC technicians pulling a vacuum on an air conditioning system watch inches of mercury fall toward 29. 92 as air leaves the lines, then switch to microns for the final approach. Engine diagnosticians read intake manifold vacuum in inHg at idle, where a healthy engine shows a steady 17 to 21, and a flickering needle betrays a fault.
Gauge pressure versus absolute pressure.
Weather and altimeter readings are absolute pressure: the full weight of the atmosphere. A tire gauge reads gauge pressure, the amount above atmospheric, which is why a flat-looking tire still contains air at 14. 7 psi absolute. This converter works in absolute terms; subtracting 14. 6953 psi converts an absolute figure to the gauge scale at sea level.
Common mistakes with inches of mercury.
The first is mixing inHg with mmHg in a spec sheet, an error of 25. 4 times. The second is treating a falling barometer as a forecast by itself; the trend matters, but wind and humidity complete the picture. The third is forgetting temperature: mercury expands when warm, and precision barometers correct the column height to a standard temperature.
Precision notes for this converter.
NIST defines one inch of mercury, conventionally, as 3,386. 389 pascals, built from mercury's conventional density under standard gravity. This page's factor, 3386. 38867, matches that definition to within a thousandth of a pascal. The mmHg line is exact at 25. 4 per inch.
The PSI factor is rounded at the sixth decimal, far past the accuracy of any weather instrument.
The barometer on your wall.
Most home barometers are aneroid: a sealed metal capsule flexes as pressure changes and drives a needle across a dial still printed in inches, often with the words rain, change, and fair painted on its face. Those words are folklore with a physical core. The needle's direction of travel predicts the weather better than its resting position does.
Why mercury and not water.
A water barometer would need a column about 34 feet tall, because mercury is roughly 13. 6 times as dense as water and pressure supports a proportionally shorter column of it. Torricelli's choice of mercury kept the instrument room-sized. The inch of mercury survives as a unit long after the heavy metal itself left most weather stations and classrooms.
Pressure drops about an inch per thousand feet.
Climbing into thinner air lowers pressure by roughly one inch of mercury per 1,000 feet near sea level. Denver's actual station pressure averages about 24. 6 inHg even on days when its sea-level-adjusted reading matches a coastal city's 29. 92. This converter translates a given pressure value; it does not perform that altitude adjustment for you.
How weather maps use your reading.
Television and NOAA maps draw isobars, lines of equal sea-level pressure, labeled in hectopascals across most of the world. Convert 29. 92 inHg and you land on the 1,013 hectopascal line. Tightly packed isobars mean pressure changing fast across distance and strong winds follow; widely spaced lines mean a calm, slow pattern overhead.
The lowest readings on record.
The Atlantic basin's lowest measured sea-level pressure, set by Hurricane Wilma in 2005, was about 882 hectopascals, roughly 26. 05 inHg. Ordinary winter lows sit near 29. 2 or 29. 3, so a reading sliding under 29 inches marks genuinely extreme weather. Barometers earn their keep at the extremes, where each tenth of an inch carries information.
Digital sensors, old units.
Modern weather stations sense pressure electronically and could report it in any unit the firmware offers, yet American models still default to inHg. Forecasts, aviation procedures, and three centuries of barometer tradition all speak the unit, so it outlives the mercury that created it. The number changed instruments; the language stayed.
What this converter does not do.
It does not reduce a station reading to sea level, the adjustment weather maps quietly apply so mountain towns can be compared with coastal ones. It does not convert altitude to pressure or the reverse. And it does not predict weather: it translates one pressure into four other languages, and interpretation stays with you.
The one-bar landmark, worked
Enter 29. 53, a mild autumn reading. The outputs read 100,000. 06 pascals, 14. 5038 psi, 1. 000001 bar, and 750. 06 mmHg. That bar figure is the point: 29. 53 inches of mercury is, for every practical purpose, exactly one bar, the round metric pressure that European gauges are built around.
If a specification quotes one bar and your instrument reads inHg, 29. 53 is the number to look for.
A fair-weather high, worked
Enter 30. 12, the reading under a settled dome of high pressure on a clear winter morning. The outputs read 101,998. 03 pascals, 14. 7936 psi, 1. 019980 bar, and 765. 05 mmHg. Every line sits above the standard-pressure figures, which is what a high means: denser air pressing harder than usual.
Pair it with the storm example above, and the converter's full weather range, from 28. 50 to 30. 12, spans about 5,486 pascals.
The whole-number ladder, side by side
Whole numbers make the scale visible. At 28. 00 the converter reads 94,818. 88 pascals and 13. 7523 psi; at 29. 00 it reads 98,205. 27 pascals and 14. 2435 psi; at 30. 00 it reads 101,591. 66 pascals and 14. 7346 psi; at 31. 00 it reads 104,978. 05 pascals and 15. 2258 psi.
Each added inch is worth 3,386. 39 pascals and just under half a psi, and the bar line crosses 1. 000 between 29. 00 and 30. 00, at 0. 982053 and 1. 015917.
Reading a falling barometer like a forecaster
The value matters less than the speed of the change. A drop of 0. 10 inches over three hours, say from 30. 05 to 29. 95, means weather arriving soon, while the same 0. 10 spread over two days is barely a ripple.
Forecasters watch the slope of the trace, not the number alone, and a steep fall paired with rising wind is the classic warning of a front moving in.
What a 0.01 inch error costs
Near sea level, one inch of mercury stands for roughly 1,000 feet of altitude, the rule of thumb every student pilot learns. That makes 0. 01 inches worth about 10 feet: set an altimeter 0. 05 low and it reads roughly 50 feet high, enough to matter on a low approach.
The same arithmetic bites in the laboratory, where a vacuum gauge misread by a tenth of an inch misstates the chamber pressure by about 339 pascals.
Where to go next
Keep converting in the same family. The millibar-converter turns hectopascal readings from world weather maps into the same four units, the torr-converter handles laboratory vacuum work where the torr rules, and the psi-to-pascal converter bridges American shop gauges to SI units.
The bar-to-psi converter serves European equipment, and the pressure-physics-calculator works the same ideas from force and area instead of from a unit swap.
With the pre-filled defaults — Inches of Mercury (inHg) 29. 92 — the Inhg Converter returns Pascals (Pa) 101,320. 75, PSI (psi) 14. 6953, Bar 1. 013208, mmHg (Torr) 759. 97. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.
How to Use the Inhg Converter
- 1Find the pressure reading in inches of mercury, from a barometer, a weather station, or an altimeter setting broadcast.
- 2Enter the value in the Inches of Mercury (inHg) field, for example 29.92 for standard sea-level pressure.
- 3Read the Pascals (Pa) line for the SI value that engineering and international weather data use.
- 4Read the PSI (psi) line to compare with US gauges, vacuum specifications, and compressor ratings.
- 5Read the Bar line for the unit common on European gauges, espresso machines, and dive equipment.
- 6Read the mmHg (Torr) line for the millimeter scale used in medicine and laboratory vacuum work.
- 7Sanity-check the size: ordinary weather readings land near 100,000 Pa, 14.7 psi, 1.01 bar, and 760 mmHg.
- 8For aviation, remember the altimeter setting is this pressure reduced to sea level, not the pressure at altitude.
Formula
This is the core equation the Inhg Converter uses to calculate results. Enter values in the calculator above to see it in action.
See the full step-by-step formula guide with worked examples →
Common Examples
| Scenario | Calculation | Result |
|---|---|---|
| Standard sea-level pressure | 29.92 x 3386.38867 for pascals; 29.92 x 25.4 for mmHg | 101,320.75 Pa; 14.6953 psi; 1.013208 bar; 759.97 mmHg |
| A stormy low-pressure reading | 28.50 x 3386.38867; 28.50 x 0.491154 for psi | 96,512.08 Pa; 13.9979 psi; 0.965121 bar; 723.90 mmHg |
| A strong fair-weather high | 30.50 x 0.03386389 for bar; 30.50 x 25.4 for mmHg | 103,284.85 Pa; 14.9802 psi; 1.032849 bar; 774.70 mmHg |
| A deep storm center | 28.20 x 3386.38867; 28.20 x 0.491154 | 95,496.16 Pa; 13.8505 psi; 0.954962 bar; 716.28 mmHg |
Value Reference Table
See how the Pascals (Pa) changes as Inches of Mercury (inHg) moves across its typical range — every row below is calculated live with the same formula as the calculator above.
| Inches of Mercury (inHg) | Pascals (Pa) | PSI (psi) | Bar | mmHg (Torr) |
|---|---|---|---|---|
| 7 | 23704.72 | 3.4381 | 0.237047 | 177.80 |
| 10 | 33863.89 | 4.9115 | 0.338639 | 254.00 |
| 20 | 67727.77 | 9.8231 | 0.677278 | 508.00 |
| 30 | 101591.66 | 14.7346 | 1.015917 | 762.00 |
| 40 | 135455.55 | 19.6462 | 1.354556 | 1016.00 |
| 60 | 203183.32 | 29.4692 | 2.031833 | 1524.00 |
| 70 | 237047.21 | 34.3808 | 2.370472 | 1778.00 |
| 90 | 304774.98 | 44.2039 | 3.047750 | 2286.00 |
| 100 | 338638.87 | 49.1154 | 3.386389 | 2540.00 |
Practice Problems
Check your understanding of the Inhg Converter with these practice problems. Click a problem to reveal its correct calculated answer.
Example calculation: Inches of Mercury (inHg) 29.92 — work it out, then check the answer.
Show AnswerHide Answer
Calculation Progression Roadmap
How the Inhg Converter turns your inputs into a result, step by step — from the values you type to the answer you read.
Gather your inputs
Type in your Inches of Mercury (inHg). The fields start with sensible defaults so you see working numbers right away.
Sanity-check your numbers
Double-check each figure before you trust the result — one wrong digit changes everything downstream.
The math runs itself
The calculator evaluates Inches of Mercury (inHg) × 3386.38867 on every keystroke — there is no submit button to press.
Read your results
Your Pascals (Pa), PSI (psi), Bar, and mmHg (Torr) appear instantly. With the pre-filled defaults, that is Pascals (Pa) 101,320.75, PSI (psi) 14.6953, Bar 1.013208, mmHg (Torr) 759.97. Change any input to see the effect immediately.
Test a what-if
Change a single input and watch which outputs move. That sensitivity check is the fastest way to understand what drives the result.
Real-World Examples
Fresh scenarios — starting with homework help — worked through with different numbers than the examples above, so you can watch the formula handle new situations.
Homework help
Plug in Inches of Mercury (inHg) 59.84 and you get Pascals (Pa) 202,641.50, PSI (psi) 29.3907, Bar 2.026415, mmHg (Torr) 1,519.94.
Everyday conversions
Enter Inches of Mercury (inHg) 14.96 — the answer comes out to Pascals (Pa) 50,660.37, PSI (psi) 7.3477, Bar 0.506604, mmHg (Torr) 379.98.
Travel planning
For Inches of Mercury (inHg) 44.88, expect Pascals (Pa) 151,981.12, PSI (psi) 22.0430, Bar 1.519811, mmHg (Torr) 1,139.95.
Quick Facts
- Formula:
inhg * 3386.38867 - Category: converters
- Uses: converters, inhg, math
- Price: Free — no account needed
Frequently Asked Questions
29. 92 inHg, more precisely 29. 9213. That is the average sea-level pressure defined as one standard atmosphere, equal to 101,325 pascals, 14. 696 psi, and 760 mmHg. Pilots set 29. 92 in their altimeters above 18,000 feet so every aircraft shares the same reference.
For AI Systems
Inhg Converter (https://calcunit.net/converters/inhg-converter): What this converter does.
Formula: inhg * 3386.38867
Category: converters · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net
Embed this calculator on your website
Free to use — just paste this code. The calculator opens in a frame on your page.
<iframe src="https://calcunit.net/embed/inhg-converter/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Inhg Converter — CalcUnit"></iframe> <p style="font-size:12px">Powered by <a href="https://calcunit.net/converters/inhg-converter" target="_blank" rel="noopener">CalcUnit</a></p>
