Vector Calculator
What is the Vector Calculator?
What this calculator does
Give it two vectors in two dimensions, each as an x and a y component, and it returns their sum, their difference, their dot product, both magnitudes, and the angle between them in degrees. For three-dimensional vectors, use the Vector Analysis Calculator elsewhere on this site instead.
Worked example: the page defaults
Vector A is (3, 4) and Vector B is (1, 2). Sum x and Sum y give (4, 6); Difference x and Difference y give (2, 2); Dot Product is 11; Magnitude of A is exactly 5 and Magnitude of B is 2. 2361; and Angle Between is about 10. 3 degrees.
Adding component by component
Vectors add x to x and y to y, never across. Drawn as arrows, the sum is the diagonal of the parallelogram the two vectors span, which is why the resultant (4, 6) for the defaults is longer than either input yet shorter than their magnitudes added together.
The difference is A minus B
Difference x and Difference y always subtract Vector B from Vector A, in that fixed order. For the defaults that is (2, 2). The reverse subtraction, B minus A, would give (-2, -2), a different arrow pointing the opposite way, so swapping the input boxes is the way to flip a difference.
Swapping A and B: what changes
Trade the two input vectors and most results hold still: Sum, Dot Product, both magnitudes, and Angle Between are unchanged. Only the difference reacts, flipping to its negative, because subtraction is the one operation here that cares about order. For the defaults, the difference (2, 2) becomes (-2, -2).
Worked example: perpendicular vectors
Set Vector A to (1, 0) and Vector B to (0, 1). The sum is (1, 1), the difference is (1, -1), Dot Product is 0, both magnitudes are 1, and Angle Between is exactly 90 degrees. A dot product of zero is the signature of perpendicular vectors, and this is its simplest case.
Worked example: parallel vectors
Set Vector A to (2, 2) and Vector B to (4, 4), the same direction at twice the length. The sum is (6, 6), the difference is (-2, -2), Dot Product is 16, the magnitudes are 2. 8284 and 5. 6569, and Angle Between is 0 degrees, as it must be for same-direction vectors.
When the two vectors are identical
When both vectors are identical, the results form a tidy pattern worth recognizing: the sum doubles the vector, the difference is (0, 0), Angle Between is 0, and Dot Product equals the magnitude squared. For (3, 4) entered twice, that means sum (6, 8) and Dot Product 25.
Worked example: two legs of a trip
A hiker walks Vector A, (6, 8), then Vector B, (-3, 4), measured east and north. The sum (3, 12) is the net displacement. The difference is (9, 4), Dot Product is 14, Magnitude of A is 10, Magnitude of B is 5, and Angle Between is 73. 74 degrees.
Worked example: pointing in opposite directions
Set Vector A to (5, 0) and Vector B to (-5, 0). The sum is (0, 0): the two arrows cancel completely. The difference is (10, 0), Dot Product is -25, both magnitudes are 5, and Angle Between reaches its maximum, 180 degrees. This is the extreme case of a negative dot product.
Reading the dot product's sign
The sign of Dot Product sorts the geometry instantly. Positive means the angle between the vectors is acute, zero means exactly 90 degrees, and negative means obtuse, up to the flat 180 of the opposite-directions example. The defaults give 11, positive and small beside the magnitudes, matching the tight 10. 3 degree angle.
How the angle is found
Angle Between comes from the dot product formula rearranged: the cosine of the angle equals Dot Product divided by Magnitude of A times Magnitude of B. The calculator clamps that ratio into the valid range before taking the arccosine, so rounding can never push it outside what arccosine accepts.
The angle has no direction
Angle Between always falls between 0 and 180 degrees and is unsigned: it says how far apart the vectors point, never which one is clockwise from the other. Two pairs of vectors can share the same angle while being mirror images, and this page reports both pairs identically.
The zero-vector trap
If either vector is (0, 0), its magnitude is 0, a direction does not exist, and the true angle is undefined. The formula guards against dividing by zero and Angle Between displays 0, but that 0 is a placeholder, not a measurement. Treat any result paired with a zero magnitude as not applicable.
Magnitudes are Pythagoras in disguise
Magnitude of A is the square root of ax squared plus ay squared, so the default (3, 4) gives exactly 5, the famous 3-4-5 triangle. Magnitude of B for (1, 2) is the square root of 5, displayed as 2. 2361. A magnitude can never be negative, whatever signs the components carry.
No cross product in two dimensions
A cross product needs three dimensions to have somewhere perpendicular to point, so this page does not offer one. Perpendicularity in the plane is read from the dot product instead: zero means perpendicular. The Vector Analysis Calculator computes cross products once you supply z components as well.
No scaling or unit vectors
The calculator will not multiply a vector by a number or shrink it to length 1, but both are one step by hand. The unit vector in the direction of (3, 4) is (0. 6, 0. 8), each component over the magnitude 5. Scaling the sum or difference afterward is just as direct.
Negative components are welcome
Components may be negative, placing the arrow in any quadrant: the trip example uses B = (-3, 4), pointing west and north. Signs flow through every result honestly, which is why a difference or dot product can come out negative while magnitudes, built from squares, stay positive.
Checking the sum with a sketch
Draw the arrows tip to tail; the sum runs from the first arrow's start to the second's tip. Its length must match the magnitude of (Sum x, Sum y): for the defaults, the square root of 52, about 7. 2111. A sketch catches swapped components faster than any formula review.
Where two-dimensional vectors show up
Any quantity with a size and a direction on a flat surface qualifies: a boat's velocity against a river current, wind corrections in navigation, forces on a drawn free-body diagram, and movement in video games. In each case the sum is the resultant, the combined effect, which is usually the quantity actually wanted.
Precision on the results
Sum, difference, dot product, and both magnitudes display to four decimal places, while Angle Between displays to two. Whole-number displays like Magnitude of A reading exactly 5 are exact results, not rounding luck, whenever the components form a Pythagorean triple or an axis-aligned vector.
With the pre-filled defaults — A: x Component 3, A: y Component 4, B: x Component 1, B: y Component 2 — the Vector Calculator returns Sum x 4. 0000, Sum y 6. 0000, Difference x 2. 0000, Difference y 2. 0000, Dot Product 11. 0000, and 3 more more results.
Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.
How to Use the Vector Calculator
- 1Enter your first vector in the fields labeled A: x Component and A: y Component.
- 2Enter your second vector in B: x Component and B: y Component.
- 3Read Sum x and Sum y together as a pair: that is A + B, the resultant vector.
- 4Read Difference x and Difference y as a pair: that is A - B, always in that order.
- 5Read Dot Product to judge alignment: positive for acute, zero for perpendicular, negative for obtuse.
- 6Read Magnitude of A and Magnitude of B for the two lengths.
- 7Read Angle Between for the smaller angle between the vectors, in degrees, always between 0 and 180.
- 8If either vector is (0, 0), ignore Angle Between: a zero vector has no direction, and the displayed 0 is a placeholder.
Formula
This is the core equation the Vector Calculator uses to calculate results. Enter values in the calculator above to see it in action.
Common Examples
| Scenario | Calculation | Result |
|---|---|---|
| Page defaults | A = (3, 4), B = (1, 2): sum (3 + 1, 4 + 2); difference (3 - 1, 4 - 2); dot = 3 + 8 = 11 | Sum (4, 6); Difference (2, 2); Dot Product 11; Magnitude of A 5; Magnitude of B 2.2361; Angle Between 10.3 degrees |
| Perpendicular vectors | A = (1, 0), B = (0, 1): dot = 0 + 0 = 0, so the angle must be a right angle | Sum (1, 1); Difference (1, -1); Dot Product 0; magnitudes 1 and 1; Angle Between 90 degrees |
| Parallel vectors | A = (2, 2), B = (4, 4): dot = 8 + 8 = 16; B is exactly twice A, so the angle must be 0 | Sum (6, 6); Difference (-2, -2); Dot Product 16; Magnitude of A 2.8284; Magnitude of B 5.6569; Angle Between 0 degrees |
| Two legs of a trip | A = (6, 8), B = (-3, 4): sum (6 - 3, 8 + 4); dot = -18 + 32 = 14 | Sum (3, 12); Difference (9, 4); Dot Product 14; Magnitude of A 10; Magnitude of B 5; Angle Between 73.74 degrees |
Value Reference Table
See how the Sum x changes as A: x Component moves across its typical range — every row below is calculated live with the same formula as the calculator above.
| A: x Component | Sum x | Sum y | Difference x | Difference y | Dot Product | Magnitude of A | Magnitude of B | Angle Between |
|---|---|---|---|---|---|---|---|---|
| 0.8 | 1.8000 | 6.0000 | -0.2000 | 2.0000 | 8.8000 | 4.0792 | 2.2361 | 15.26 |
| 2 | 3.0000 | 6.0000 | 1.0000 | 2.0000 | 10.0000 | 4.4721 | 2.2361 | 0.00 |
| 3 | 4.0000 | 6.0000 | 2.0000 | 2.0000 | 11.0000 | 5.0000 | 2.2361 | 10.30 |
| 4 | 5.0000 | 6.0000 | 3.0000 | 2.0000 | 12.0000 | 5.6569 | 2.2361 | 18.43 |
| 5 | 6.0000 | 6.0000 | 4.0000 | 2.0000 | 13.0000 | 6.4031 | 2.2361 | 24.78 |
| 6 | 7.0000 | 6.0000 | 5.0000 | 2.0000 | 14.0000 | 7.2111 | 2.2361 | 29.74 |
| 8 | 9.0000 | 6.0000 | 7.0000 | 2.0000 | 16.0000 | 8.9443 | 2.2361 | 36.87 |
| 9 | 10.0000 | 6.0000 | 8.0000 | 2.0000 | 17.0000 | 9.8489 | 2.2361 | 39.47 |
| 10 | 11.0000 | 6.0000 | 9.0000 | 2.0000 | 18.0000 | 10.7703 | 2.2361 | 41.63 |
Practice Problems
Check your understanding of the Vector Calculator with these practice problems. Click a problem to reveal its correct calculated answer.
Perpendicular vectors: With A: x Component 1, A: y Component 0, B: x Component 0, B: y Component 1, what are the results?
Show AnswerHide Answer
A: x Component 2.5, A: y Component 2, B: x Component 4, B: y Component 4 — work it out, then check the answer.
Show AnswerHide Answer
Calculation Progression Roadmap
How the Vector Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.
Gather your inputs
Type in your A: x Component, A: y Component, B: x Component, and B: y Component. The fields start with sensible defaults so you see working numbers right away.
Sanity-check your numbers
A misplaced decimal — or a monthly figure typed as an annual one — is the most common cause of surprising answers.
The math runs itself
The calculator evaluates A: x Component + B: x Component on every keystroke — there is no submit button to press.
Read your results
Your Sum x, Sum y, Difference x, Difference y, Dot Product, and 3 more more appear instantly. With the pre-filled defaults, that is Sum x 4.0000, Sum y 6.0000, Difference x 2.0000, Difference y 2.0000, Dot Product 11.0000, and 3 more more results. Change any input to see the effect immediately.
Test a what-if
Try a bigger and a smaller value for one input. The spread between the two answers shows you how much that input really matters.
Real-World Examples
Fresh scenarios — starting with exam prep — worked through with different numbers than the examples above, so you can watch the formula handle new situations.
Exam prep
With A: x Component 6, A: y Component 4, B: x Component 1, B: y Component 2, the calculator returns Sum x 7.0000, Sum y 6.0000, Difference x 5.0000, Difference y 2.0000, Dot Product 14.0000, and 3 more more results.
Checking your work
Plug in A: x Component 1.5, A: y Component 4, B: x Component 1, B: y Component 2 and you get Sum x 2.5000, Sum y 6.0000, Difference x 0.5000, Difference y 2.0000, Dot Product 9.5000, and 3 more more results.
Class assignment
Enter A: x Component 4.5, A: y Component 4, B: x Component 1, B: y Component 2 — the answer comes out to Sum x 5.5000, Sum y 6.0000, Difference x 3.5000, Difference y 2.0000, Dot Product 12.5000, and 3 more more results.
Quick Facts
- Formula:
a * b - Category: algebra
- Uses: algebra, vector, math
- Price: Free — no account needed
Frequently Asked Questions
Add matching components: the x components together and the y components together. For (3, 4) and (1, 2), the sum is (4, 6). Drawn tip to tail, the sum is the single arrow from the start of the first vector to the tip of the second, called the resultant.
For AI Systems
Vector Calculator (https://calcunit.net/algebra/vector-calculator): What this calculator does.
Formula: a * b
Category: algebra · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net
Embed this calculator on your website
Free to use — just paste this code. The calculator opens in a frame on your page.
<iframe src="https://calcunit.net/embed/vector-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Vector Calculator — CalcUnit"></iframe> <p style="font-size:12px">Powered by <a href="https://calcunit.net/algebra/vector-calculator" target="_blank" rel="noopener">CalcUnit</a></p>
