CalcUnit Logo

Vector Analysis Calculator

What is the Vector Analysis Calculator?

What this calculator does

Give it two vectors in three dimensions, each as an x, y, and z component, and it returns the dot product, the three components of the cross product, and the magnitude of each vector. It is the three-dimensional companion to the two-dimensional Vector Calculator elsewhere on this site.

Dot versus cross: the core distinction

The dot product combines two vectors into a single number, a measure of how much they point the same way. The cross product combines them into a brand-new vector, perpendicular to both, whose length reflects how far from parallel they are. Confusing the two is the most common beginner error.

Worked example: the page defaults

Vector A is (1, 2, 3) and Vector B is (4, 5, 6). Dot Product reads 32, from 4 + 10 + 18. Cross Product x, y, and z read -3, 6, and -3. Magnitude of A reads 3. 7417 and Magnitude of B reads 8. 775, the square roots of 14 and 77 respectively.

Reading the cross product lines

The cross product is not three separate answers; it is one vector reported in three fields. Cross Product x, Cross Product y, and Cross Product z must be read together, in that order, as the components of a single arrow: here, the vector (-3, 6, -3) for the default pair.

Worked example: the unit axes

Set Vector A to (1, 0, 0) and Vector B to (0, 1, 0), the x-axis and y-axis unit vectors. Dot Product is 0, the magnitudes are 1, and the cross product is (0, 0, 1): the z-axis itself. No cleaner illustration exists that the cross product points perpendicular to both inputs.

Worked example: mixed signs

Take Vector A as (2, -1, 3) and Vector B as (1, 4, -2). Dot Product is -8, from 2 - 4 - 6, and the cross product is (-10, 7, 9). Magnitude of A is 3. 7417 and Magnitude of B is 4. 5826. The negative dot product signals an obtuse angle.

Worked example: a perpendicular pair in disguise

Set Vector A to (0, 5, 0) and Vector B to (2, 0, 3). Neither looks like an axis pair, yet Dot Product is 0, so the vectors are perpendicular. The cross product is (15, 0, -10), Magnitude of A is exactly 5, and Magnitude of B is 3. 6056.

Worked example: two short diagonals

With Vector A as (1, 1, 0) and Vector B as (0, 1, 1), Dot Product is 1, the cross product is (1, -1, 1), and both magnitudes read 1. 4142, the square root of 2. Small inputs like these are the ones worth doing by hand once, to see the cross formula's pattern.

The cross product is perpendicular to both

Here is a correctness check. Dot the default cross product (-3, 6, -3) with Vector A: -3 + 12 - 9 = 0. Dot it with Vector B: -12 + 30 - 18 = 0. A cross product failing either check was computed with a sign error, which is why the check matters.

Order matters for the cross product

Swap the two input vectors and Dot Product, Magnitude of A, and Magnitude of B all stay the same, but every cross product component flips sign: B cross A for the defaults is (3, -6, 3), exactly the negative of A cross B. The dot product is commutative; the cross product is anti-commutative.

What a negative dot product tells you

For nonzero vectors, a positive dot product means the angle between them is acute, zero means exactly 90 degrees, and a negative value means the angle is obtuse, between 90 and 180 degrees. The mixed-signs example above, with its dot product of -8, is the obtuse case in action.

No angle is reported on this page

Unlike the two-dimensional Vector Calculator, this page never converts the dot product into degrees. You can recover the angle yourself from cos of the angle equals Dot Product divided by the product of the magnitudes: for the defaults, 32 over 32. 8329 gives an angle of about 12. 93 degrees.

Two-dimensional vectors need a z of zero

For a flat problem, enter 0 for both z components. Dot Product and magnitudes then match the two-dimensional answers, and the cross product points along z: for A (3, 4, 0) and B (1, 2, 0), the cross product is (0, 0, 2), whose z value is the 2D determinant.

Parallel vectors give a zero cross product

If Vector B is a scalar multiple of Vector A, the cross product collapses to (0, 0, 0). Doubling the default A to get B (2, 4, 6) gives Dot Product 28 and a cross product of exactly zero. A zero cross product with nonzero vectors always means parallel or anti-parallel directions.

Magnitudes use Pythagoras in three dimensions

Magnitude of A is the square root of ax squared plus ay squared plus az squared, the distance formula extended to a third axis. That is why the default (1, 2, 3) gives the square root of 14, about 3. 7417, and why component order never affects a magnitude.

Units ride along silently

The fields accept bare numbers, so units live entirely in your problem. If Vector A is a force in newtons and Vector B a displacement in meters, Dot Product comes out in joules, the unit of work. Keep both vectors in one unit system, or every result inherits the mismatch.

Where these products earn their keep

Physics runs on them: work is the dot product of force and displacement, torque is the cross product of lever arm and force, and magnetic flux is a dot product through a surface. Computer graphics uses cross products to find the direction a surface faces, for lighting calculations.

The right-hand rule for direction

Point your right-hand fingers along Vector A and curl them toward Vector B; your thumb gives the cross product's direction. That physical rule is why swapping A and B reverses the result, and it is the standard way to predict the sign pattern before calculating.

A common mistake: the middle component's sign

Cross Product y is computed as az times bx minus ax times bz, the one component whose terms feel reversed compared with its neighbors. Most hand-computed cross product errors live in that middle line, so check it first when the perpendicular test fails.

A common mistake: adding the cross components

Students sometimes total the three cross product fields into one number, but the components are coordinates of a single vector and must never be merged. (-3, 6, -3) is the answer; -3 plus 6 plus -3, which happens to be 0 here, is meaningless as a summary.

Precision on every line

All six results display to four decimal places. Magnitudes are irrational for most inputs, so 3. 7417 is a rounded display of the square root of 14, while integer results like Dot Product 32 are exact. When a magnitude prints as a clean whole number, the components formed a Pythagorean-style triple.

With the pre-filled defaults — A: x Component 1, A: y Component 2, A: z Component 3, B: x Component 4, B: y Component 5, and 1 more more inputs — the Vector Analysis Calculator returns Dot Product 32. 0000, Cross Product x -3. 0000, Cross Product y 6. 0000, Cross Product z -3. 0000, Magnitude of A 3.

7417, and 1 more more results. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Vector Analysis Calculator

  1. 1Enter your first vector in the fields labeled A: x Component, A: y Component, and A: z Component.
  2. 2Enter your second vector in B: x Component, B: y Component, and B: z Component.
  3. 3For a flat two-dimensional problem, enter 0 in both A: z Component and B: z Component.
  4. 4Read Dot Product: a single number. Zero means the vectors are perpendicular; a negative value means the angle between them is obtuse.
  5. 5Read Cross Product x, Cross Product y, and Cross Product z together, in that order, as one vector.
  6. 6Read Magnitude of A and Magnitude of B for the two lengths.
  7. 7Sanity-check the cross product: dot it with each original vector in turn; both results should be 0.
  8. 8If you swap the A and B entries, expect Dot Product and the magnitudes to stay fixed while every cross product sign flips.

Formula

a * b

This is the core equation the Vector Analysis Calculator uses to calculate results. Enter values in the calculator above to see it in action.

Common Examples

ScenarioCalculationResult
Page defaultsA = (1, 2, 3), B = (4, 5, 6): dot = 4 + 10 + 18; cross = (2·6 - 3·5, 3·4 - 1·6, 1·5 - 2·4)Dot Product 32; Cross Product (-3, 6, -3); Magnitude of A 3.7417; Magnitude of B 8.775
Unit axesA = (1, 0, 0), B = (0, 1, 0): dot = 0; cross = (0·0 - 0·1, 0·0 - 1·0, 1·1 - 0·0)Dot Product 0; Cross Product (0, 0, 1); Magnitude of A 1; Magnitude of B 1
Mixed signsA = (2, -1, 3), B = (1, 4, -2): dot = 2 - 4 - 6; cross = (-1·-2 - 3·4, 3·1 - 2·-2, 2·4 - -1·1)Dot Product -8; Cross Product (-10, 7, 9); Magnitude of A 3.7417; Magnitude of B 4.5826
Perpendicular pairA = (0, 5, 0), B = (2, 0, 3): dot = 0 + 0 + 0; cross = (5·3 - 0·0, 0·2 - 0·3, 0·0 - 5·2)Dot Product 0; Cross Product (15, 0, -10); Magnitude of A 5; Magnitude of B 3.6056

Value Reference Table

See how the Dot Product changes as A: x Component moves across its typical range — every row below is calculated live with the same formula as the calculator above.

A: x ComponentDot ProductCross Product xCross Product yCross Product zMagnitude of AMagnitude of B
0.329.2000-3.000010.2000-6.50003.61808.7750
0.530.0000-3.00009.0000-5.50003.64018.7750
0.831.2000-3.00007.2000-4.00003.69328.7750
132.0000-3.00006.0000-3.00003.74178.7750
236.0000-3.00000.00002.00004.12318.7750
340.0000-3.0000-6.00007.00004.69048.7750
444.0000-3.0000-12.000012.00005.38528.7750

Practice Problems

Check your understanding of the Vector Analysis Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Unit axes: You enter A: x Component 1, A: y Component 0, A: z Component 0, B: x Component 0, B: y Component 1, and 1 more more inputs — what does the calculator return?

Show Answer
Entering A: x Component 1, A: y Component 0, A: z Component 0, B: x Component 0, B: y Component 1, and 1 more more inputs gives Dot Product 0.0000, Cross Product x 0.0000, Cross Product y 0.0000, Cross Product z 1.0000, Magnitude of A 1.0000, and 1 more more results.
Q2

With A: x Component 2.5, A: y Component -1, A: z Component 3, B: x Component 1, B: y Component 4, and 1 more more inputs, what are the results?

Show Answer
The calculator returns Dot Product -7.5000, Cross Product x -10.0000, Cross Product y 8.0000, Cross Product z 11.0000, Magnitude of A 4.0311, and 1 more more results for A: x Component 2.5, A: y Component -1, A: z Component 3, B: x Component 1, B: y Component 4, and 1 more more inputs.

Calculation Progression Roadmap

How the Vector Analysis Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your A: x Component, A: y Component, A: z Component, B: x Component, B: y Component, and 1 more more. The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

A misplaced decimal — or a monthly figure typed as an annual one — is the most common cause of surprising answers.

3

The math runs itself

The calculator evaluates A: x Component × B: x Component + A: y Component × B: y Component + A: z Component × B: z Component on every keystroke — there is no submit button to press.

4

Read your results

Your Dot Product, Cross Product x, Cross Product y, Cross Product z, Magnitude of A, and 1 more more appear instantly. With the pre-filled defaults, that is Dot Product 32.0000, Cross Product x -3.0000, Cross Product y 6.0000, Cross Product z -3.0000, Magnitude of A 3.7417, and 1 more more results. Change any input to see the effect immediately.

5

Test a what-if

Try a bigger and a smaller value for one input. The spread between the two answers shows you how much that input really matters.

Real-World Examples

Fresh scenarios — starting with step-by-step practice — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Step-by-step practice

A quick run with A: x Component 2, A: y Component 2, A: z Component 3, B: x Component 4, B: y Component 5, and 1 more more inputs gives Dot Product 36.0000, Cross Product x -3.0000, Cross Product y 0.0000, Cross Product z 2.0000, Magnitude of A 4.1231, and 1 more more results.

2

Exam prep

With A: x Component 0.5, A: y Component 2, A: z Component 3, B: x Component 4, B: y Component 5, and 1 more more inputs, the calculator returns Dot Product 30.0000, Cross Product x -3.0000, Cross Product y 9.0000, Cross Product z -5.5000, Magnitude of A 3.6401, and 1 more more results.

3

Checking your work

Plug in A: x Component 1.5, A: y Component 2, A: z Component 3, B: x Component 4, B: y Component 5, and 1 more more inputs and you get Dot Product 34.0000, Cross Product x -3.0000, Cross Product y 3.0000, Cross Product z -0.5000, Magnitude of A 3.9051, and 1 more more results.

Quick Facts

  • Formula: a * b
  • Category: algebra
  • Uses: algebra, vector analysis, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

The dot product returns one number measuring alignment: ax·bx + ay·by + az·bz. The cross product returns a new vector perpendicular to both inputs. One answers how much do they agree; the other answers which way is perpendicular. They are not interchangeable.

For AI Systems

Vector Analysis Calculator (https://calcunit.net/algebra/vector-analysis-calculator): What this calculator does.

Formula: a * b

Category: algebra · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/vector-analysis-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Vector Analysis Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/algebra/vector-analysis-calculator" target="_blank" rel="noopener">CalcUnit</a></p>